Road-mapping the future of our industry

1. General details

Address
City
State/Province
Zip/Postal
Country

2. Payment details

Please note that payment is not processed until your place has been confirmed on this course and you've received a confirmation email.

3. Cancellation policy

Attendees will be fully refunded if they decide to cancel the course up to one week prior to the commencement of the first module. After this, no refund will be made.

4. Declaration

By submitting this application to HERA I agree to the following terms and conditions: Publicity - by becoming enrolled in a HERA course, I automatically agree to the mention of my name or images of myself taken at the seminar to be used in news media. NZTE subsidation - in seeking assistance from NZTE to subsidise course costs, it is the responsibility of the applicant and their business to process this application. HERA cannot be held responsible and/or accountable if unsuccessful. Course work - attendees agree to completing allocated homework, course assignments, after hours study and similar if requested. In filling out this application form in its entirety I agree to be bound by the terms and conditions in every respect.
Welding supervisor AS2214 exam

1. Personal information

Address
City
State/Province
Zip/Postal
Country

2. Exam prerequisites

4. Payment

5. Declaration

I confirm the information that I have given is correct and I understand the HERA ANB can withdraw any qualifications/diplomas in the case of their misuse.

6. Cancellation Policy

Persons enrolled who wish to cancel must do so in writing. Up to 14 days prior to the seminar a 10% administration deduction fee applies. Between 7 - 14 days prior a 50% deduction applies. Less than seven days, no refund will be provided. HERA reserves the right to cancel the course or modules due to insufficient registrations or other reasons beyond it's control. In this case a full refund on paid fees will be provided - but HERA is not liable for any costs incurred for booking flights and accommodation prior to attendee receiving their confirmation email.
HERA Welding Inspection Course Part 2 (IWI-B)

1. Personal information

Postal address
Address 1
Address 2
City
State/Province
Zip/Postal

Postal address for Correspondence (if different from above)

Postal address
City
State/Province
Zip/Postal

2. Course access conditions

Entry to the course is open however: 1. Students require proficiency in the comprehension and writing of English as used in the engineering industry, and in basic mathematics. 2. There are specific requirements if you wish to take the examinations for the IIW International Welding Inspector (B) qualification. Tick √ the relevant box below:
Drop a file here or click to upload Choose File
Maximum upload size: 52.43MB
Drop a file here or click to upload Choose File
Maximum upload size: 52.43MB
Drop a file here or click to upload Choose File
Maximum upload size: 52.43MB

3. Special requirements

4. Course fees & payment

All prices stated below include gst. Course fee's cover the one week full time course and comprehensive course notes. Please note that although we collect payment details at this stage - we don't charge your credit card until the course and your attendance has been confirmed via email.
HERA membership is available at low cost. Contact us for information on the classes of membership and the cost, or visit the HERA website at www.hera.org.nz.

5. Cancellation policy

Once an applicant has been approved for enrollment, payment will be processed. Persons enrolled who wish to cancel must do so in writing. Up to 14 days prior to the seminar a 10% administration deduction fee applies. Between 7 - 14 days prior a 50% deduction applies. Less than seven days, no refund will be provided. HERA reserves the right to cancel the course or modules due to insufficient registrations or other reasons beyond it's control. In this case a full refund on paid fees will be provided - but HERA is not liable for any costs incurred for booking flights and accommodation prior to attendee receiving their confirmation email.

6. Declaration

By submitting this application to HERA, I agree to the following terms and conditions: Publicity - by becoming enrolled in a HERA course, I automatically agree to the mention of my name or images of myself taken at the course to be used in news media. I have read the cancellation points and undertake to abide by the conditions of the agreement. By submitting this application I undertake to have provided a full and factual disclosure of all relevant information and acknowledge that HERA may cancel my enrolment if information is found to be false or if the information required is not supplied by the due date. I authorise HERA to collect, use and disclose personal information about me in accordance with the Privacy Act 1993, and I understand that HERA ANB can withdraw any qualifications / diploma's in the case of misuse. In filling out this application form in its entirety I agree to be bound by the terms and conditions in every respect.
Welding Inspection part.2 IWI-S

1. Personal information

Postal address
Address 1
Address 2
City
State/Province
Zip/Postal

2. Course access conditions

Entry to the course is open however: 1. Students require proficiency in the comprehension and writing of English as used in the engineering industry, and in basic mathematics. 2. There are specific requirements if you wish to take the examinations for the IIW International Welding Inspector (S) qualification. Tick √ the relevant box below:
Please note that if you're attending this course to obtain your CBIP CWI qualifications, you'll need to book your exams separately. You can do so by contacting CBIP by email at cbip@clear.net.nz or by phone on +64 6 759 4360.
Drop a file here or click to upload Choose File
Maximum upload size: 52.43MB
Drop a file here or click to upload Choose File
Maximum upload size: 52.43MB

3. Special requirements

4. Course fees & payment

All prices stated below include gst. Course fee's cover the one week full time course and comprehensive course notes. Please note that although we collect payment details at this stage - we don't charge your credit card until the course and your attendance has been confirmed via email.
HERA membership is available at low cost. Contact us for information on the classes of membership and the cost, or visit the HERA webpage at www.hera.org.nz.

5. Cancellation policy

Persons enrolled who wish to cancel must do so in writing. Up to 14 days prior to the seminar a 10% administration deduction fee applies. Between 7 - 14 days prior a 50% deduction applies. Less than seven days, no refund will be provided. HERA reserves the right to cancel the course or modules due to insufficient registrations or other reasons beyond it's control. In this case a full refund on paid fees will be provided - but HERA is not liable for any costs incurred for booking flights and accommodation prior to attendee receiving their confirmation email.

6. Declaration

By submitting this application to HERA, I agree to the following terms and conditions: Publicity - by becoming enrolled in a HERA course, I automatically agree to the mention of my name or images of myself taken at the course to be used in news media. I have read the cancellation points and undertake to abide by the conditions of the agreement. By submitting this application I undertake to have provided a full and factual disclosure of all relevant information and acknowledge that HERA may cancel my enrolment if information is found to be false or if the information required is not supplied by the due date. I authorise HERA to collect, use and disclose personal information about me in accordance with the Privacy Act 1993, and I understand that HERA ANB can withdraw any qualifications / diploma's in the case of misuse. In filling out this application form in its entirety I agree to be bound by the terms and conditions in every respect.
WI1 exam application form (IWI-B)

1. Personal information

Address
City
State/Province
Zip/Postal
Country

2. Exam pre-requisites

3. Eyesight

An optometrist certificate obtained within three months of the application must be submitted with this application form. Unaided or corrected near visual acuity in at least one eye shall be such that the candidate is capable of reading N4 Times Roman type or Jaeger J1 at a distance of not less than 30 cm on a standard reading chart.
Drop a file here or click to upload Choose File
Maximum upload size: 52.43MB

4. Exam fees and payment

Credit Card

5. Declaration

I confirm the information that I have given is correct and I understand the HERA ANB can withdraw any qualifications/diplomas in the case of their misuse.

6. Cancellation Policy

Persons enrolled who wish to cancel must do so in writing. Up to 14 days prior to the seminar a 10% administration deduction fee applies. Between 7 - 14 days prior a 50% deduction applies. Less than seven days, no refund will be provided. HERA reserves the right to cancel the course or modules due to insufficient registrations or other reasons beyond it's control. In this case a full refund on paid fees will be provided - but HERA is not liable for any costs incurred for booking flights and accommodation prior to attendee receiving their confirmation email.
WI2 exam application form (IWI-S)

1. Personal information

Address
City
State/Province
Zip/Postal
Country

2. Exam pre-requisites

3. Eyesight

An optometrist certificate obtained within three months of the application must be submitted with this application form. Unaided or corrected near visual acuity in at least one eye shall be such that the candidate is capable of reading N4 Times Roman type or Jaeger J1 at a distance of not less than 30 cm on a standard reading chart.
Drop a file here or click to upload Choose File
Maximum upload size: 52.43MB

4. Exam fees & payment

Credit Card

5. Declaration

I confirm the information that I have given is correct and I understand the HERA ANB can withdraw any qualifications/diplomas in the case of their misuse.

6. Cancellation Policy

Persons enrolled who wish to cancel must do so in writing. Up to 14 days prior to the seminar a 10% administration deduction fee applies. Between 7 - 14 days prior a 50% deduction applies. Less than seven days, no refund will be provided. HERA reserves the right to cancel the course or modules due to insufficient registrations or other reasons beyond it's control. In this case a full refund on paid fees will be provided - but HERA is not liable for any costs incurred for booking flights and accommodation prior to attendee receiving their confirmation email.
Bottleneck Analysis Seminar

1. General details

Address
City
State/Province
Zip/Postal
Country

2. Payment details

Please note that payment is not processed until your place has been confirmed on this course and you've received a confirmation email.

3. Cancellation policy

Attendees will be fully refunded if they decide to cancel the course up to one week prior to the commencement of the first module. After this, no refund will be made.

4. Declaration

By submitting this application to HERA I agree to the following terms and conditions: Publicity - by becoming enrolled in a HERA course, I automatically agree to the mention of my name or images of myself taken at the seminar to be used in news media. NZTE subsidation - in seeking assistance from NZTE to subsidise course costs, it is the responsibility of the applicant and their business to process this application. HERA cannot be held responsible and/or accountable if unsuccessful. Course work - attendees agree to completing allocated homework, course assignments, after hours study and similar if requested. In filling out this application form in its entirety I agree to be bound by the terms and conditions in every respect.
Bottleneck Analysis Seminar

1. General details

Address
City
State/Province
Zip/Postal
Country

2. Payment details

Please note that payment is not processed until your place has been confirmed on this course and you've received a confirmation email.

3. Cancellation policy

Attendees will be fully refunded if they decide to cancel the course up to one week prior to the commencement of the first module. After this, no refund will be made.

4. Declaration

By submitting this application to HERA I agree to the following terms and conditions: Publicity - by becoming enrolled in a HERA course, I automatically agree to the mention of my name or images of myself taken at the seminar to be used in news media. NZTE subsidation - in seeking assistance from NZTE to subsidise course costs, it is the responsibility of the applicant and their business to process this application. HERA cannot be held responsible and/or accountable if unsuccessful. Course work - attendees agree to completing allocated homework, course assignments, after hours study and similar if requested. In filling out this application form in its entirety I agree to be bound by the terms and conditions in every respect.
Bottleneck Analysis Seminar

1. General details

Address
City
State/Province
Zip/Postal
Country

2. Payment details

Please note that payment is not processed until your place has been confirmed on this course and you've received a confirmation email.

3. Cancellation policy

Attendees will be fully refunded if they decide to cancel the course up to one week prior to the commencement of the first module. After this, no refund will be made.

4. Declaration

By submitting this application to HERA I agree to the following terms and conditions: Publicity - by becoming enrolled in a HERA course, I automatically agree to the mention of my name or images of myself taken at the seminar to be used in news media. NZTE subsidation - in seeking assistance from NZTE to subsidise course costs, it is the responsibility of the applicant and their business to process this application. HERA cannot be held responsible and/or accountable if unsuccessful. Course work - attendees agree to completing allocated homework, course assignments, after hours study and similar if requested. In filling out this application form in its entirety I agree to be bound by the terms and conditions in every respect.
Welding Supervisor | Welding Inspection Part 1

1. Personal information

Postal address
Address 1
Address 2
City
State/Province
Zip/Postal

2. Course access requirements

Students require proficiency in the comprehension and writing of English as used in the engineering industry, as well as basic math skills. In addition - IIW require attendees to be deemed a 'professional worker' or person having relevant experience in 'metalworking' professions. Please provide details below of your most recent three years of work history in a related profession.
Drop a file here or click to upload Choose File
Maximum upload size: 52.43MB
Provide endorsed copies of qualifications (endorsed means a copy signed by HERA ANB Manager, an employer, a Chartered Engineer, or Justice of the Peace).
Drop a file here or click to upload Choose File
Maximum upload size: 52.43MB
Provide endorsed copies of qualifications (endorsed means a copy signed by HERA ANB Manager, an employer, a Chartered Engineer, or Justice of the Peace).
Drop a file here or click to upload Choose File
Maximum upload size: 52.43MB
Provide endorsed copies of qualifications (endorsed means a copy signed by HERA ANB Manager, an employer, a Chartered Engineer, or Justice of the Peace).
Drop a file here or click to upload Choose File
Maximum upload size: 52.43MB
Provide endorsed copies of qualifications (endorsed means a copy signed by HERA ANB Manager, an employer, a Chartered Engineer, or Justice of the Peace).
Drop a file here or click to upload Choose File
Maximum upload size: 52.43MB
Copy of a driver licence, passport, or passport photograph is required.

4. Course fees, payment and location

All prices stated below include gst. Course fee's cover the one week full time course, exclusive course notes and distance learning assignments and assessments. Exam refresher course and papers are additional to course costs. Please note that although we collect payment details at this stage - we don't charge your credit card until the course and your attendance has been confirmed.
If you’re not a HERA member already – you should seriously consider joining our association! Not only will this reduce your course fees now for your business, but also for any of your employees throughout the year. And depending on the tier of membership you choose – you can also enjoy discounts on offered resources and other membership benefits as well

5. Exam & Distance learning refresher course fees

All prices stated below include gst. Course fee's cover the one week full time course, exclusive course notes and distance learning assignments and assessments. Exam refresher course and papers are additional to course costs. Please note that although we collect payment details at this stage - we don't charge your credit card until the course and your attendance has been confirmed.
If you’re not a HERA member already – you should seriously consider joining our association! Not only will this reduce your course fees now for your business, but also for any of your employees throughout the year. And depending on the tier of membership you choose – you can also enjoy discounts on offered resources and other membership benefits as well

6. Declaration

By submitting this application to HERA, I agree to the following terms and conditions: Publicity - by becoming enrolled in a HERA course, I automatically agree to the mention of my name or images of myself taken at the course to be used in news media. I have read the cancellation points and undertake to abide by the conditions of the agreement. By submitting this application I undertake to have provided a full and factual disclosure of all relevant information and acknowledge that HERA may cancel my enrolment if information is found to be false or if the information required is not supplied by the due date. I authorise HERA to collect, use and disclose personal information about me in accordance with the Privacy Act 1993, and I understand that HERA ANB can withdraw any qualifications / diploma's in the case of misuse. In filling out this application form in its entirety I agree to be bound by the terms and conditions in every respect.

7. Cancellation policy

Once an applicant has been approved for enrollment, payment will be processed. Persons enrolled who wish to cancel must do so in writing. Up to 14 days prior to the seminar a 10% administration deduction fee applies. Between 7 - 14 days prior a 50% deduction applies. Less than seven days, no refund will be provided. HERA reserves the right to cancel the course or modules due to insufficient registrations or other reasons beyond it's control. In this case a full refund on paid fees will be provided - but HERA is not liable for any costs incurred for booking flights and accommodation prior to attendee receiving their confirmation email.
Welding Supervisor | Welding Inspection Part 1

1. Personal information

Postal address
Address 1
Address 2
City
State/Province
Zip/Postal

2. Course access requirements

Students require proficiency in the comprehension and writing of English as used in the engineering industry, as well as basic math skills. In addition - IIW require attendees to be deemed a 'professional worker' or person having relevant experience in 'metalworking' professions. Please provide details below of your most recent three years of work history in a related profession.
Drop a file here or click to upload Choose File
Maximum upload size: 52.43MB
Provide endorsed copies of qualifications (endorsed means a copy signed by HERA ANB Manager, an employer, a Chartered Engineer, or Justice of the Peace).
Drop a file here or click to upload Choose File
Maximum upload size: 52.43MB
Provide endorsed copies of qualifications (endorsed means a copy signed by HERA ANB Manager, an employer, a Chartered Engineer, or Justice of the Peace).
Drop a file here or click to upload Choose File
Maximum upload size: 52.43MB
Provide endorsed copies of qualifications (endorsed means a copy signed by HERA ANB Manager, an employer, a Chartered Engineer, or Justice of the Peace).
Drop a file here or click to upload Choose File
Maximum upload size: 52.43MB
Provide endorsed copies of qualifications (endorsed means a copy signed by HERA ANB Manager, an employer, a Chartered Engineer, or Justice of the Peace).
Drop a file here or click to upload Choose File
Maximum upload size: 52.43MB
Copy of a driver licence, passport, or passport photograph is required.

4. Course fees, payment and location

All prices stated below include gst. Course fee's cover the one week full time course, exclusive course notes and distance learning assignments and assessments. Exam refresher course and papers are additional to course costs. Please note that although we collect payment details at this stage - we don't charge your credit card until the course and your attendance has been confirmed.
If you’re not a HERA member already – you should seriously consider joining our association! Not only will this reduce your course fees now for your business, but also for any of your employees throughout the year. And depending on the tier of membership you choose – you can also enjoy discounts on offered resources and other membership benefits as well

5. Exam & Distance learning refresher course fees

All prices stated below include gst. Course fee's cover the one week full time course, exclusive course notes and distance learning assignments and assessments. Exam refresher course and papers are additional to course costs. Please note that although we collect payment details at this stage - we don't charge your credit card until the course and your attendance has been confirmed.
If you’re not a HERA member already – you should seriously consider joining our association! Not only will this reduce your course fees now for your business, but also for any of your employees throughout the year. And depending on the tier of membership you choose – you can also enjoy discounts on offered resources and other membership benefits as well

6. Declaration

By submitting this application to HERA, I agree to the following terms and conditions: Publicity - by becoming enrolled in a HERA course, I automatically agree to the mention of my name or images of myself taken at the course to be used in news media. I have read the cancellation points and undertake to abide by the conditions of the agreement. By submitting this application I undertake to have provided a full and factual disclosure of all relevant information and acknowledge that HERA may cancel my enrolment if information is found to be false or if the information required is not supplied by the due date. I authorise HERA to collect, use and disclose personal information about me in accordance with the Privacy Act 1993, and I understand that HERA ANB can withdraw any qualifications / diploma's in the case of misuse. In filling out this application form in its entirety I agree to be bound by the terms and conditions in every respect.

7. Cancellation policy

Once an applicant has been approved for enrollment, payment will be processed. Persons enrolled who wish to cancel must do so in writing. Up to 14 days prior to the seminar a 10% administration deduction fee applies. Between 7 - 14 days prior a 50% deduction applies. Less than seven days, no refund will be provided. HERA reserves the right to cancel the course or modules due to insufficient registrations or other reasons beyond it's control. In this case a full refund on paid fees will be provided - but HERA is not liable for any costs incurred for booking flights and accommodation prior to attendee receiving their confirmation email.
Welding supervisor AS2214 exam

1. Personal information

Address
City
State/Province
Zip/Postal
Country

2. Exam prerequisites

4. Payment

5. Declaration

I confirm the information that I have given is correct and I understand the HERA ANB can withdraw any qualifications/diplomas in the case of their misuse.

6. Cancellation Policy

Persons enrolled who wish to cancel must do so in writing. Up to 14 days prior to the seminar a 10% administration deduction fee applies. Between 7 - 14 days prior a 50% deduction applies. Less than seven days, no refund will be provided. HERA reserves the right to cancel the course or modules due to insufficient registrations or other reasons beyond it's control. In this case a full refund on paid fees will be provided - but HERA is not liable for any costs incurred for booking flights and accommodation prior to attendee receiving their confirmation email.
Welding supervisor AS2214 exam

1. Personal information

Address
City
State/Province
Zip/Postal
Country

2. Exam prerequisites

4. Payment

5. Declaration

I confirm the information that I have given is correct and I understand the HERA ANB can withdraw any qualifications/diplomas in the case of their misuse.

6. Cancellation Policy

Persons enrolled who wish to cancel must do so in writing. Up to 14 days prior to the seminar a 10% administration deduction fee applies. Between 7 - 14 days prior a 50% deduction applies. Less than seven days, no refund will be provided. HERA reserves the right to cancel the course or modules due to insufficient registrations or other reasons beyond it's control. In this case a full refund on paid fees will be provided - but HERA is not liable for any costs incurred for booking flights and accommodation prior to attendee receiving their confirmation email.
Bottleneck Analysis Seminar

1. General details

Address
City
State/Province
Zip/Postal
Country

2. Payment details

Please note that payment is not processed until your place has been confirmed on this course and you've received a confirmation email.

3. Cancellation policy

Attendees will be fully refunded if they decide to cancel the course up to one week prior to the commencement of the first module. After this, no refund will be made.

4. Declaration

By submitting this application to HERA I agree to the following terms and conditions: Publicity - by becoming enrolled in a HERA course, I automatically agree to the mention of my name or images of myself taken at the seminar to be used in news media. NZTE subsidation - in seeking assistance from NZTE to subsidise course costs, it is the responsibility of the applicant and their business to process this application. HERA cannot be held responsible and/or accountable if unsuccessful. Course work - attendees agree to completing allocated homework, course assignments, after hours study and similar if requested. In filling out this application form in its entirety I agree to be bound by the terms and conditions in every respect.
BEGIN:VCALENDAR VERSION:2.0 PRODID:-//HERA - ECPv4.6.25//NONSGML v1.0//EN CALSCALE:GREGORIAN METHOD:PUBLISH X-WR-CALNAME:HERA X-ORIGINAL-URL:https://www.hera.org.nz X-WR-CALDESC:Events for HERA BEGIN:VEVENT DTSTART;TZID=UTC+13:20190402T103000 DTEND;TZID=UTC+13:20190402T180000 DTSTAMP:20190323T132131 CREATED:20190307T021025Z LAST-MODIFIED:20190319T212940Z UID:8944-1554201000-1554228000@www.hera.org.nz SUMMARY:Road-mapping the future of our industry DESCRIPTION:[vc_row][vc_column][vc_column_text] \nRoad-mapping the future of our Industry | Limited seats available | Auckland\nTuesday 2 April\n[/vc_column_text][/vc_column][/vc_row][vc_row][vc_column][vc_tta_tabs][vc_tta_section title=”Overview” tab_id=”1524522430413-398f4c15-9ae6″][vc_row_inner][vc_column_inner width=”1/2″][vc_column_text]Most of our members have a strategy in place for their businesses. But does it take into account planning for your future technology needs? \nThis can be a huge capital expense\, and not one that you want to be unprepared for. That’s why it’s become clear that in the current business climate\, planning a clear line of sight on how you’ll be able to plan for such technologies and resources is key. \nOur ‘Road-mapping our future’ workshop is designed to achieve this. Allowing you to get to grips with future megatrends you should plan for in your business and how as an industry you might be able to collaborate to develop out a stronger equipment capability together.[/vc_column_text][/vc_column_inner][vc_column_inner width=”1/2″][vc_single_image image=”9044″ img_size=”full”][/vc_column_inner][/vc_row_inner][vc_column_text]Why attend? \nYou’ll come away with the tools and insight to stage gate your technology needs so it’s more achievable from a cost\, resource and time perspective while aligning this with your strategic focuses. \nWe’ll also focus on showing you how to manage your IP and share it in a safe way so that you’re able to get crucial feedback without risk of losing your IP value.  This is very important so you can gain critical diverse thinking and a trusted feedback loop so you can innovate effectively. \nBy the end of the event you’ll have a clearer perspective on where your business is at in the industry context\, valuable insight on how to implement workshop learnings\, and more. \nThis is a rare and not to be missed opportunity. \nBecome part of our industry innovation community and register today to be part of our industry future.[/vc_column_text][/vc_tta_section][vc_tta_section title=”Part 1″ tab_id=”1547775859458-b47812b3-b09e”][vc_column_text] \n\n\nIP management using agile methodologies \n\n\n\n\nThere is a trend towards open innovation and agile business practices (e.g. lean\, MVP and pivots). However\, the new wave of agile methodologies developed for digital technologies need to be adapted and integrated into traditional stage-gate methods to realise their full potential when producing physical products. \nWe also see that the scale and joined-up nature of business in New Zealand brings special challenges and opportunities for collaboration among organisations. \n  \nParticipants will learn how to: \n\n\n[/vc_column_text]\nimplement the best combination of agile and stage-gate processes to ensure the company develops new products effectively and invests in the right projects.\nrealise the benefits of effective collaboration among businesses (e.g. partners\, customers\, suppliers\, etc.) by applying proven techniques.\n\n[/vc_tta_section][vc_tta_section title=”Part 2″ tab_id=”1547775860538-59a46ba7-d5c2″][vc_column_text] \n\n\nRoadmapping the future \nThe second part of the workshop will be about strategic industry roadmapping. Roadmapping is widely used to support strategy development and innovation. It offers a proven framework for aligning strategic perspectives with technology perspectives. \n  \nIn this workshop\, participants will: \n\n\n[/vc_column_text]\nlearn about roadmapping techniques and how they can be used\ncollaboratively develop a ‘first-cut’\, high-level industry roadmap for New Zealand’s heavy engineering steel industry\n\n[/vc_tta_section][vc_tta_section title=”Agenda” tab_id=”1547775861340-1b0d07e1-d424″][vc_column_text] \n\n\n\nTime\nAgenda item\n  \n \n\n\n10.00 – 10:30\nWelcome/Morning tea\n\n\n\n  \n10.30 – 12:00\n  \nFrom close to collaborative – considering IP and still have open inquiry\n  \nPeter Lee\n\n\n12:00 – 12:45\nLunch\n\n\n\n12:45 – 1:00\nRoad-mapping overview – what is it\, why is it useful?\nEli Krull\n\n\n1:00 – 2:30\nStrategic landscape & strategic opportunities (timeline 10 years) \n–          Market trends and drivers \n–          Products and services \nTechnology and resources\n  \n  \n  \n  \n \n\n\n2:30 – 3:00\nCoffee – prioritizing opportunities\n\n\n\n3:00 – 4:15\n‘First-cut’ roadmaps for priority opportunities\n\n\n\n4:15 – 4:45\nFeedback and review\n\n\n\n5.00pm\nNetworking over drinks\n\n\n\n\n[/vc_column_text][/vc_tta_section][vc_tta_section title=”Presenters” tab_id=”1524459413493-f2fac342-5e13″][vc_row_inner][vc_column_inner width=”1/4″][vc_single_image image=”9087″ img_size=”full”][/vc_column_inner][vc_column_inner width=”3/4″][vc_column_text]Dr Peter Lee | University of Auckland Consulting Professor \nI have a background of more than 30 years steeped in senior roles in US business commercialisation\, investment and entrepreneurship. \nI’ve helped many innovative companies to realise their full business potential internationally\, and have served as Chief Defence Technologist for New Zealand\, a Registered Technology Transfer Professional and Member of Institute of Directors. \nI’m currently a consultant to the Vice Chancellor of the University of Auckland\, and will be talking to you about trends towards open innovation and agile business practices.[/vc_column_text][/vc_column_inner][/vc_row_inner][vc_row_inner][vc_column_inner width=”1/4″][vc_single_image image=”9086″ img_size=”full”][/vc_column_inner][vc_column_inner width=”3/4″][vc_column_text]Dr Elizabeth Krull | University of Auckland Research Fellow \nI am a research fellow at the University of Auckland Business School and teach technology roadmapping principles as part of the commercialisation and entrepreneurship program. I have previously also worked in corporate strategy in the banking industry.[/vc_column_text][/vc_column_inner][/vc_row_inner][/vc_tta_section][vc_tta_section title=”Cost” tab_id=”1500872991069-d507152e-87b4″][vc_row_inner][vc_column_inner][vc_empty_space][/vc_column_inner][/vc_row_inner][vc_row_inner][vc_column_inner width=”1/3″] \n$138 \n[vc_column_text] \nHERA Platinum Ordinary members \n45% discount \n[/vc_column_text][/vc_column_inner][vc_column_inner width=”1/3″] \n$210 \n[vc_column_text] \nHERA Associate or Affiliate members \n15% discount \n[/vc_column_text][/vc_column_inner][vc_column_inner width=”1/3″] \n$248 \n[vc_column_text] \nNon member \nFull price \n[/vc_column_text][/vc_column_inner][/vc_row_inner][vc_row_inner][vc_column_inner][vc_column_text] \n\nAll prices are inclusive of GST\nPast and current participants of Innovation READY attend for free\n\n  \nWant to get a HERA membership discount\, but aren’t a member? \nFind out how to become one today.  Or contact our Manager Members Services and Support Brian Low for a chat. \nNot only will this reduce your course fees for your business\, but also for any of your employees throughout the year. And depending on the tier of membership you choose you can also enjoy discounts on offered resources and other membership benefits as well.[/vc_column_text][/vc_column_inner][/vc_row_inner][/vc_tta_section][vc_tta_section title=”Location” tab_id=”1552344503764-5e5b6377-0d4e”][vc_row_inner][vc_column_inner width=”1/2″][vc_column_text]HERA House \n17-19 Gladding Place \nManukau \nAuckland[/vc_column_text][/vc_column_inner][vc_column_inner width=”1/2″][vc_gmaps link=”#E-8_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”][/vc_column_inner][/vc_row_inner][/vc_tta_section][vc_tta_section title=”Register” tab_id=”1508113354455-7b0628c0-17fd”][vc_row_inner][vc_column_inner][vc_column_text] \n\nBookings \nRegister today by simply filling out the online form below and we’ll take care of the rest! \nHave questions? Contact our General Manager Industry Development Dr Boaz Habib.[/vc_column_text][/vc_column_inner][/vc_row_inner][vc_row_inner][vc_column_inner][vc_column_text][/vc_column_text][/vc_column_inner][/vc_row_inner][/vc_tta_section][/vc_tta_tabs][/vc_column][/vc_row] \n URL:https://www.hera.org.nz/event/roadmapping-future/ LOCATION:HERA House\, 17-19 Gladding Place\, Manukau\, Auckland\, AKL\, 2104\, New Zealand GEO:-36.989674;174.885805 X-APPLE-STRUCTURED-LOCATION;VALUE=URI;X-ADDRESS=HERA House 17-19 Gladding Place Manukau Auckland AKL 2104 New Zealand;X-APPLE-RADIUS=500;X-TITLE=17-19 Gladding Place\, Manukau:geo:174.885805,-36.989674 CATEGORIES:Courses ATTACH;FMTTYPE=image/jpeg:https://www.hera.org.nz/wp-content/uploads/Aerial-view-of-arches.jpg ORGANIZER;CN="Boaz%20Habib":MAILTO:boaz.habib@hera.org.nz END:VEVENT BEGIN:VEVENT DTSTART;TZID=UTC+13:20190412T083000 DTEND;TZID=UTC+13:20190412T163000 DTSTAMP:20190323T132131 CREATED:20180801T220015Z LAST-MODIFIED:20190319T212925Z UID:7278-1555057800-1555086600@www.hera.org.nz SUMMARY:Welding Supervisor | Welding Inspection Part 1 Exam | Auckland DESCRIPTION:[vc_row][vc_column][vc_column_text] \nWelding Supervisor | Welding Inspection Part 1 | Exam\nAuckland Friday 12th April\n\n[/vc_column_text][/vc_column][/vc_row][vc_row][vc_column][vc_tta_tabs][vc_tta_section title=”Overview” tab_id=”1518482179102-93cebb0f-f228″][vc_row_inner][vc_column_inner width=”1/2″][vc_column_text]AS 2214 Welding supervisor/Welding technology module 1 exam \nApplicants for this exam will be assessed to ensure they meet the pre-examination requirements specified by the International Institute of Welding (IIW) and AS 2214. \n[/vc_column_text][/vc_column_inner][vc_column_inner width=”1/2″][vc_single_image image=”6291″ img_size=”full” add_caption=”yes” onclick=”custom_link” img_link_target=”_blank” link=”https://www.hera.org.nz/wp-content/uploads/SCIAPS-WORKSHOP-NZ-HERA-2018.pdf”][/vc_column_inner][/vc_row_inner][/vc_tta_section][vc_tta_section title=”Exam pre-requisites” tab_id=”1523516856391-0244b76e-fe9b”][vc_row_inner][vc_column_inner][vc_column_text]Examination prerequisites \nTo successfully enroll and sit this exam\, applicants must have: \n\nFor IIW WT1 – satisfactory completed the WT1 Welding supervisor course including distance learning component.\nFor AS 2214 – have documentary evidence of having one of the following:\n\n\nThree years approved practical experience in the fabrication engineering industry\, and successful completion of an approved course that includes.\n\n– welding process technology; \n– weld testing and inspection\, and \n– standards and specifications \n\nThree years approved experience in the supervision or inspection of welding\nA qualification in either engineering\, metallurgy or welding\, and three years approved experience related to the practical application of welding.\n\nIf you haven’t supplied the required documentation with your WT1 Welding Supervisor Course application this examination application will not proceed until you have demonstrated that you meet these requirements. \n  \nResults \nEach candidate will be notified by email of the marks awarded for each paper and the result of either PASS or FAIL. \nThe results will be posted to candidates within eight weeks after the examinations have been sat.[/vc_column_text][/vc_column_inner][/vc_row_inner][/vc_tta_section][vc_tta_section title=”Location” tab_id=”1518146612623-d303a88f-95f4″][vc_row_inner][vc_column_inner width=”1/2″][vc_column_text]Auckland \nHERA House \n17-19 Gladding Place\, Manukau \nAuckland 2104[/vc_column_text][/vc_column_inner][vc_column_inner width=”1/2″][vc_gmaps link=”#E-8_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”][/vc_column_inner][/vc_row_inner][/vc_tta_section][vc_tta_section title=”Prices” tab_id=”1523518687697-c5153e94-cc53″][vc_row_inner][vc_column_inner width=”1/2″] \n$300 \n[vc_column_text] \nPaper A \n[/vc_column_text][/vc_column_inner][vc_column_inner width=”1/2″] \n$200 \n[vc_column_text] \nPaper B \n[/vc_column_text][/vc_column_inner][/vc_row_inner][vc_row_inner][vc_column_inner][vc_column_text] \n\nAll prices are inclusive of GST\n\n  \nNon Member? \nIf you’re not a HERA member already you should seriously consider joining our association! \nNot only will this reduce your course fees for your business\, but also for any of your employees throughout the year. And depending on the tier of membership you choose you can also enjoy discounts on offered resources and other membership benefits as well \nFor more information please click here\, or email our Manager Membership Services and Support Brian Low.[/vc_column_text][/vc_column_inner][/vc_row_inner][/vc_tta_section][vc_tta_section title=”Register” tab_id=”1508113354455-7b0628c0-17fd”][vc_row_inner][vc_column_inner width=”2/3″][vc_column_text]Register to attend \nSimply fill out the online form below to register.[/vc_column_text][/vc_column_inner][vc_column_inner width=”1/3″][/vc_column_inner][/vc_row_inner][vc_column_text][/vc_column_text][/vc_tta_section][/vc_tta_tabs][vc_empty_space height=”50px”][/vc_column][/vc_row] \n URL:https://www.hera.org.nz/event/welding-supervisor-welding-inspection-part-1-exams/ LOCATION:HERA House\, 17-19 Gladding Place\, Manukau\, Auckland\, AKL\, 2104\, New Zealand GEO:-36.989674;174.885805 X-APPLE-STRUCTURED-LOCATION;VALUE=URI;X-ADDRESS=HERA House 17-19 Gladding Place Manukau Auckland AKL 2104 New Zealand;X-APPLE-RADIUS=500;X-TITLE=17-19 Gladding Place\, Manukau:geo:174.885805,-36.989674 CATEGORIES:Courses ATTACH;FMTTYPE=image/jpeg:https://www.hera.org.nz/wp-content/uploads/20180412_Event_WeldingSupervisorExams_WELD-AM.jpg ORGANIZER;CN="Alan%20McClintock":MAILTO:alan.mcclintock@hera.org.nz END:VEVENT BEGIN:VEVENT DTSTART;TZID=UTC+13:20190513T083000 DTEND;TZID=UTC+13:20190517T163000 DTSTAMP:20190323T132132 CREATED:20180830T050549Z LAST-MODIFIED:20190315T005912Z UID:6148-1557736200-1558110600@www.hera.org.nz SUMMARY:IIW International Welding Inspector Basic Course (IWI-B) DESCRIPTION:[vc_row][vc_column][vc_column_text] \nIIW International Welding Inspector Basic Course(IWI-B)| 1 week course | Limited seats available\n13 – 17 May 2019\n[/vc_column_text][/vc_column][/vc_row][vc_row][vc_column][vc_tta_tabs][vc_tta_section title=”Overview” tab_id=”1518482179102-93cebb0f-f228″][vc_row_inner][vc_column_inner width=”2/3″][vc_column_text]About this course \nThis course provides training in welding inspection as required by the International Institute of Welding (IIW) International Welding Inspector – Basic (IWI-B) qualification. \nIt covers the scope of inspection activities including the role and responsibilities of a Welding Inspector\, welding terms and definitions\, mechanical testing on welded joints\, types and causes of weld imperfections\, welding procedures\, approvals and welder approvals. It also addresses NDT Techniques – in particular testing methods\, visual inspection\, liquid penetrant testing\, magnetic particle testing\, radiographic testing\, ultrasonic testing\, pressure test\, dimensional tests\, quality assurance\, and practical inspection work.[/vc_column_text][vc_empty_space][/vc_column_inner][vc_column_inner width=”1/3″][vc_single_image image=”8578″ img_size=”full”][/vc_column_inner][/vc_row_inner][vc_row_inner][vc_column_inner][vc_column_text]Course Entry Requirements \nThe prerequisite to this course is the Welding Inspection Part 1 (AS 2214 Welding Supervisor Course). \nThis course requires proficiency in the comprehension and writing of English as used in the engineering industry\, basic mathematics\, and the ability to write reports.[/vc_column_text][/vc_column_inner][/vc_row_inner][/vc_tta_section][vc_tta_section title=”Course outline” tab_id=”1500872968486-7aded090-5045″][vc_row_inner][vc_column_inner width=”3/4″][vc_column_text]Program[/vc_column_text]\n1 week full time course\n8:30am – Course starts\n10:15am – Morning tea\n12:00pm – Lunch\n14:15pm – Afternoon tea\n\nMorning – afternoon teas & notes provided by HERA \n[vc_empty_space][vc_column_text]IWI-B Examinations \nExams are held on the Saturday (18 May) following the course. \nApplication for IWI-B Examinations must be made to the HERA ANB using online examination registration form the SF001 form. \nNote that exam application is in addition to registration for the course and that course fees do not cover exam fees.[/vc_column_text][/vc_column_inner][/vc_row_inner][/vc_tta_section][vc_tta_section title=”Prices” tab_id=”1500872991069-d507152e-87b4″][vc_column_text]All prices include GST.[/vc_column_text][vc_row_inner][vc_column_inner width=”1/3″]$1055[/vc_column_inner][vc_column_inner width=”1/3″]$1630[/vc_column_inner][vc_column_inner width=”1/3″]$1920[/vc_column_inner][/vc_row_inner][vc_row_inner][vc_column_inner width=”1/3″][vc_column_text] \nHERA Ordinary member \n45% off \n[/vc_column_text][/vc_column_inner][vc_column_inner width=”1/3″][vc_column_text] \nHERA Affiliate & Associate members \n15% off \n[/vc_column_text][/vc_column_inner][vc_column_inner width=”1/3″][vc_column_text] \nNon member \nFull price \n[/vc_column_text][/vc_column_inner][/vc_row_inner][vc_separator border_width=”3″]\nFee’s include morning and afternoon tea and course notes\nFee’s quoted above are inclusive of GST\n\n[vc_empty_space height=”50px”][vc_column_text] \nWant to get HERA membership discount\, but aren’t a member? \nFind out how to become one today  Or contact our Manager Members Services and Support Brian Low for a chat. \n[/vc_column_text][/vc_tta_section][vc_tta_section title=”Location” tab_id=”1518146612623-d303a88f-95f4″][vc_row_inner][vc_column_inner width=”1/2″][vc_column_text]Address \nHERA House \n17-19 Gladding Place\, Manukau \nAuckland 2104[/vc_column_text][/vc_column_inner][vc_column_inner width=”1/2″][vc_gmaps link=”#E-8_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”][/vc_column_inner][/vc_row_inner][/vc_tta_section][vc_tta_section title=”Register” tab_id=”1508113354455-7b0628c0-17fd”][vc_row_inner][vc_column_inner][vc_column_text]Bookings \nSimply fill out the online form below to register\, and our team will take care of the rest! \n[/vc_column_text][/vc_column_inner][/vc_row_inner][vc_row_inner][vc_column_inner][vc_column_text][/vc_column_text][/vc_column_inner][/vc_row_inner][/vc_tta_section][/vc_tta_tabs][/vc_column][/vc_row] \n URL:https://www.hera.org.nz/event/iiw-international-welding-inspector-basic-course-iwi-b-auckland/ LOCATION:HERA House\, 17-19 Gladding Place\, Manukau\, Auckland\, AKL\, 2104\, New Zealand GEO:-36.989674;174.885805 X-APPLE-STRUCTURED-LOCATION;VALUE=URI;X-ADDRESS=HERA House 17-19 Gladding Place Manukau Auckland AKL 2104 New Zealand;X-APPLE-RADIUS=500;X-TITLE=17-19 Gladding Place\, Manukau:geo:174.885805,-36.989674 CATEGORIES:Courses ATTACH;FMTTYPE=image/jpeg:https://www.hera.org.nz/wp-content/uploads/HERA_Inspect_stock1-1.jpg ORGANIZER;CN="Michail%20Karpenko":MAILTO:michail.karpenko@hera.org.nz END:VEVENT BEGIN:VEVENT DTSTART;TZID=UTC+13:20190513T083000 DTEND;TZID=UTC+13:20190522T163000 DTSTAMP:20190323T132132 CREATED:20190125T023112Z LAST-MODIFIED:20190319T020118Z UID:8560-1557736200-1558542600@www.hera.org.nz SUMMARY:IIW International Welding Inspector Standard Course (IWI-S) DESCRIPTION:[vc_row][vc_column][vc_column_text] \nHERA Welding Inspection Course Part 2 (IWI-S) | 8 day course | Limited seats available |\nCourse: 13 – 22 May 2019\nIWI-S exam: 23 May 2019\n[/vc_column_text][/vc_column][/vc_row][vc_row][vc_column][vc_tta_tabs][vc_tta_section title=”Overview” tab_id=”1518482179102-93cebb0f-f228″][vc_row_inner][vc_column_inner][vc_column_text]About this course \nThe course provides training in the theory and practice of welding inspection as required by the International Institute of Welding International Welding Inspector – Standard (IWI-S) qualification\, and the CBIP Certified Welding Inspector (CWI). \n  \nCourse syllabus \nThe course content complies with requirements of the International Institute of Welding (IIW) for training in welding inspection theory and practical\, and to CBIP Document No PRO-CER-07. \nThe course does not cover welding technology training (IIW welding technology module); this is covered in Welding Inspection Part 1 that is to be completed before this course. \nCourse content covers the scope of inspection activities including the role and responsibilities of a Welding Inspector\, welding terms and definitions\, mechanical testing on welded joints\, types and causes of weld imperfections\, welding procedures\, approvals and welder approvals. It also addresses NDT Techniques – in particular testing methods\, visual inspection\, liquid penetrant testing\, magnetic particle testing\, radiographic testing\, ultrasonic testing\, pressure test\, dimensional tests\, quality assurance\, and practical inspection work. \n [/vc_column_text][/vc_column_inner][/vc_row_inner][/vc_tta_section][vc_tta_section title=”Course outline” tab_id=”1500872968486-7aded090-5045″][vc_row_inner][vc_column_inner width=”1/4″]\nDuration: 8 day course\n\n[/vc_column_inner][vc_column_inner width=”3/4″][vc_column_text]Program[/vc_column_text]\n8:20am – 4:25pm\n10:15am – Morning tea\n12:00pm – Lunch\n14:15pm – Afternoon tea\n\n[vc_empty_space][vc_column_text]IWI (S) examinations \nWill be held at HERA House on Thursday 23 May 2019[/vc_column_text][/vc_column_inner][/vc_row_inner][/vc_tta_section][vc_tta_section title=”Examinations” tab_id=”1548382145393-0a363fb9-5c52″][vc_column_text]Examinations \nIIW exams for IWI-S will held on the Thursday (23 May) following the course. \nApplication for IWI-S Examinations must be made to the HERA ANB using form SF001 or at (link). \nNote that exam application is in addition to registration for the course and that course fees do not cover exam fees. \n**Applications for the CBIP CWI examinations must be made directly to CBIP.[/vc_column_text][/vc_tta_section][vc_tta_section title=”Prices” tab_id=”1500872991069-d507152e-87b4″][vc_row_inner][vc_column_inner width=”1/3″]$1445[/vc_column_inner][vc_column_inner width=”1/3″]$2230[/vc_column_inner][vc_column_inner width=”1/3″]$2620[/vc_column_inner][/vc_row_inner][vc_row_inner][vc_column_inner width=”1/3″][vc_column_text] \nHERA Ordinary Platinum member \n45% discount \n[/vc_column_text][/vc_column_inner][vc_column_inner width=”1/3″][vc_column_text] \nHERA Affiliate or Associate member \n15% discount \n[/vc_column_text][/vc_column_inner][vc_column_inner width=”1/3″][vc_column_text] \nNon HERA member \nFull price \n[/vc_column_text][/vc_column_inner][/vc_row_inner][vc_empty_space][vc_column_text]*All prices include GST as well as morning and afternoon tea\, and exclusive course notes.[/vc_column_text][vc_separator border_width=”3″][vc_column_text]Want to get a HERA membership discount\, but aren’t a member? \nFind out how to become one today.  Or contact our Manager Members Services and Support Brian Low for a chat. \nNot only will this reduce your course fees for your business\, but also for any of your employees throughout the year. And depending on the tier of membership you choose you can also enjoy discounts on offered resources and other membership benefits as well.[/vc_column_text][/vc_tta_section][vc_tta_section title=”Location” tab_id=”1518146612623-d303a88f-95f4″][vc_row_inner][vc_column_inner width=”1/2″][vc_column_text]Address \nHERA House \n17-19 Gladding Place\, Manukau \nAuckland 2104[/vc_column_text][/vc_column_inner][vc_column_inner width=”1/2″][vc_gmaps link=”#E-8_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”][/vc_column_inner][/vc_row_inner][/vc_tta_section][vc_tta_section title=”Register” tab_id=”1508113354455-7b0628c0-17fd”][vc_row_inner][vc_column_inner width=”1/2″][vc_column_text]Bookings \nSimply fill out the online form below to register\, and our team will take care of the rest! \n[/vc_column_text][vc_column_text][/vc_column_text][/vc_column_inner][vc_column_inner width=”1/2″][/vc_column_inner][/vc_row_inner][vc_row_inner][vc_column_inner][vc_column_text][/vc_column_text][/vc_column_inner][/vc_row_inner][/vc_tta_section][/vc_tta_tabs][/vc_column][/vc_row] \n URL:https://www.hera.org.nz/event/auckland-welding-inspection-part2-iwis-auckland-2/ LOCATION:HERA House\, 17-19 Gladding Place\, Manukau\, Auckland\, AKL\, 2104\, New Zealand GEO:-36.989674;174.885805 X-APPLE-STRUCTURED-LOCATION;VALUE=URI;X-ADDRESS=HERA House 17-19 Gladding Place Manukau Auckland AKL 2104 New Zealand;X-APPLE-RADIUS=500;X-TITLE=17-19 Gladding Place\, Manukau:geo:174.885805,-36.989674 CATEGORIES:Courses ATTACH;FMTTYPE=image/jpeg:https://www.hera.org.nz/wp-content/uploads/weldingsupervisor.jpg ORGANIZER;CN="Michail%20Karpenko":MAILTO:michail.karpenko@hera.org.nz END:VEVENT BEGIN:VEVENT DTSTART;TZID=UTC+13:20190518T090000 DTEND;TZID=UTC+13:20190518T150000 DTSTAMP:20190323T132132 CREATED:20180911T045422Z LAST-MODIFIED:20190315T011612Z UID:6812-1558170000-1558191600@www.hera.org.nz SUMMARY:IIW International Welding Inspector Basic Exams (IWI-B) DESCRIPTION:[vc_row][vc_column][vc_column_text] \nIIW International Welding Inspector Basic Exams (IWI-B) | HERA House | Auckland\nSaturday 18 May 2019\n[/vc_column_text][/vc_column][/vc_row][vc_row][vc_column][vc_tta_tabs active_section=”1″ title=”Information for Candidates”][vc_tta_section title=”General information” tab_id=”1529027121732-cd782187-2fcc”][vc_row_inner][vc_column_inner]Assessment of applications\nApplicants for examination will be assessed as meeting the pre-examination requirements specified by the International Institute of Welding (IIW) and AS 2214. It is essential that the examination application form be fully and correctly completed by all applicants. \nExamination prerequisites are: \n\nWelding Inspection Course Part 1 (AS 2214 Welding Supervisor Course)\, and successful completion of examinations.\nOptometrist certificate (Ref. Section 4 of Form SF001).\n\n[/vc_column_inner][/vc_row_inner][/vc_tta_section][vc_tta_section title=”Exam overview” tab_id=”1528855348087-316f2142-7ca1″][vc_row_inner][vc_column_inner width=”2/3″][vc_column_text]Publications required to prepare for IIW and HERA examinations\n• Student notes issued for the course\n• AS/NZS 1554.1:2011 Structural steel welding – Welding of steel structures\n• AS/NZS 1554.5:2011 Structural steel welding – Welding of steel structures subject to high levels of fatigue loading\n• AS/NZS 1554.6:2012 Structural steel welding – Welding stainless steels for structural purposes[/vc_column_text][/vc_column_inner][vc_column_inner width=”1/3″][vc_single_image image=”8578″ img_size=”full”][/vc_column_inner][/vc_row_inner][/vc_tta_section][vc_tta_section title=”Prices” tab_id=”1528855146618-44c7017b-56b3″][vc_row_inner][vc_column_inner width=”1/3″]Theory   $200Practical $300[vc_column_text] \nHERA Ordinary Platinum member \n45% discount \n[/vc_column_text][/vc_column_inner][vc_column_inner width=”1/3″]Theory   $235Practical $350[vc_column_text] \nHERA Associate or Affiliate members \n15% discount \n[/vc_column_text][/vc_column_inner][vc_column_inner width=”1/3″]Theory   $365Practical $545[vc_column_text] \nNon member \nFull price \n[/vc_column_text][/vc_column_inner][/vc_row_inner][vc_column_text] \n\nAll prices are inclusive of GST\n\n  \nFees:\nThe examination fee payable is noted in the application form and must be paid before the examination. \n  \nWant to get a HERA membership discount\, but aren’t a member? \nFind out how to become one today.  Or contact our Manager Members Services and Support Brian Low for a chat. \nNot only will this reduce your course fees for your business\, but also for any of your employees throughout the year. And depending on the tier of membership you choose you can also enjoy discounts on offered resources and other membership benefits as well.[/vc_column_text][/vc_tta_section][vc_tta_section title=”Location” tab_id=”1528855186209-f99787c9-2244″][vc_row_inner][vc_column_inner width=”1/2″][vc_column_text]Examination Venue\nHERA House \n17-19 Gladding Place \nManukau\, Auckland 2104. \nExamination results are sent to candidates by email and letter.[/vc_column_text][/vc_column_inner][vc_column_inner width=”1/2″][vc_gmaps link=”#E-8_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”][/vc_column_inner][/vc_row_inner][/vc_tta_section][vc_tta_section title=”Register” tab_id=”1528855187318-872c3d76-50e7″][vc_row_inner][vc_column_inner width=”1/2″][vc_column_text]To register simply fill out the form below\, and we’ll take care of the rest! \nRegistrations close Friday 10th May 2019[/vc_column_text][/vc_column_inner][vc_column_inner width=”1/2″][vc_btn title=”Taking the alternate route for entry? Download the SF1A form” i_icon_fontawesome=”fa fa-download” add_icon=”true” link=”url:https%3A%2F%2Fwww.hera.org.nz%2Fwp-content%2Fuploads%2FSF-001A_Application-For-Alternative-Route-Form.pdf||target:%20_blank|”][/vc_column_inner][/vc_row_inner][vc_empty_space][vc_row_inner][vc_column_inner][vc_column_text]*Please don’t make any travel or accommodation bookings until you’ve received confirmation the exam is going ahead[/vc_column_text][/vc_column_inner][/vc_row_inner][vc_column_text][/vc_column_text][/vc_tta_section][/vc_tta_tabs][/vc_column][/vc_row][vc_row][vc_column][/vc_column][/vc_row] \n URL:https://www.hera.org.nz/event/auckland-welding-inspection-part2-iwib-may/ LOCATION:HERA House\, 17-19 Gladding Place\, Manukau\, Auckland\, AKL\, 2104\, New Zealand GEO:-36.989674;174.885805 X-APPLE-STRUCTURED-LOCATION;VALUE=URI;X-ADDRESS=HERA House 17-19 Gladding Place Manukau Auckland AKL 2104 New Zealand;X-APPLE-RADIUS=500;X-TITLE=17-19 Gladding Place\, Manukau:geo:174.885805,-36.989674 CATEGORIES:Courses,Seminars ATTACH;FMTTYPE=image/jpeg:https://www.hera.org.nz/wp-content/uploads/Exam.jpg ORGANIZER;CN="Alan%20McClintock":MAILTO:alan.mcclintock@hera.org.nz END:VEVENT BEGIN:VEVENT DTSTART;TZID=UTC+13:20190523T090000 DTEND;TZID=UTC+13:20190523T160000 DTSTAMP:20190323T132132 CREATED:20180912T051025Z LAST-MODIFIED:20190319T020446Z UID:7566-1558602000-1558627200@www.hera.org.nz SUMMARY:IIW International Welding Inspector Standard Exams (IWI-S) DESCRIPTION:[vc_row][vc_column][vc_column_text] \nIIW International Welding Inspector Standard Exams (IWI-S) | HERA House |\nThursday 23 May 2019\n[/vc_column_text][/vc_column][/vc_row][vc_row][vc_column][vc_tta_tabs active_section=”1″ title=”Information for Candidates”][vc_tta_section title=”General information” tab_id=”1529027121732-cd782187-2fcc”][vc_row_inner][vc_column_inner][vc_column_text]There are 2 examinations: \n1. WI2 Welding Inspection Theory (2.5 hours) \n2. WI2 Welding Inspection Practical (2.5 hours) \nApplications for the IWI S examinations must be made to the HERA ANB using the SF001 WI2 form which can be downloaded in the registration box. \nNote that Welding Inspection Part 2 course fees do not cover the exam fees.[/vc_column_text][/vc_column_inner][/vc_row_inner][/vc_tta_section][vc_tta_section title=”Pre-requisites” tab_id=”1528855146598-e940a04b-6b2b”][vc_column_text]To successfully register to sit this exam you’ll need to meet the following pre-requisites:[/vc_column_text]Examination prerequisites are: \n\nWelding Inspection Courses Part 1 and Part 2\nOptometrist certificate (Ref. Section 4 of form SF001).\n\n[/vc_tta_section][vc_tta_section title=”Prices” tab_id=”1528855146618-44c7017b-56b3″][vc_row_inner][vc_column_inner width=”1/3″]Theory   $300Practical $300[vc_column_text] \nHERA Ordinary Platinum member \n45$ discount \n[/vc_column_text][/vc_column_inner][vc_column_inner width=”1/3″]Theory   $350Practical $350[vc_column_text] \nHERA Associate & Affiliate members \n15% discount \n[/vc_column_text][/vc_column_inner][vc_column_inner width=”1/3″]Theory   $545Practical $545[vc_column_text] \nNon member \nFull price \n[/vc_column_text][/vc_column_inner][/vc_row_inner][vc_empty_space][vc_column_text] \n\nPrices are inclusive of GST\n\n  \nFees:\nThe examination fee payable is noted in the application form and must be paid before the examination. \n  \nWant to take advantage of greater membership tiered discounts? \nContact our Manager Member Services and Support Brian Low about upgrading today. \nNot only will this reduce your course fees for your business\, but also for any of your employees throughout the year. And depending on the tier of membership you choose you can also enjoy discounts on offered resources and other membership benefits as well.[/vc_column_text][/vc_tta_section][vc_tta_section title=”Location” tab_id=”1528855186209-f99787c9-2244″][vc_row_inner][vc_column_inner width=”1/2″][vc_column_text]HERA House \n17-19 Gladding Place \nManukau \nAuckland 2104[/vc_column_text][/vc_column_inner][vc_column_inner width=”1/2″][vc_gmaps link=”#E-8_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”][/vc_column_inner][/vc_row_inner][/vc_tta_section][vc_tta_section title=”Register” tab_id=”1528855187318-872c3d76-50e7″][vc_row_inner][vc_column_inner width=”1/2″][vc_column_text]To register simply fill out the form below\, and we’ll take care of the rest! \n[/vc_column_text][/vc_column_inner][vc_column_inner width=”1/2″][vc_btn title=”Taking the alternate route for entry? Download the SF1A form” i_icon_fontawesome=”fa fa-download” add_icon=”true” link=”url:https%3A%2F%2Fwww.hera.org.nz%2Fwp-content%2Fuploads%2FSF-001A_Application-For-Alternative-Route-Form.pdf||target:%20_blank|”][/vc_column_inner][/vc_row_inner][vc_row_inner][vc_column_inner][vc_column_text]*Please don’t make any travel or accommodation bookings until you’ve received confirmation the exam is going ahead.[/vc_column_text][/vc_column_inner][/vc_row_inner][vc_empty_space][vc_column_text][/vc_column_text][/vc_tta_section][/vc_tta_tabs][/vc_column][/vc_row][vc_row][vc_column][/vc_column][/vc_row] \n URL:https://www.hera.org.nz/event/auckland-welding-inspection-part2-iwi-s/ LOCATION:HERA House\, 17-19 Gladding Place\, Manukau\, Auckland\, AKL\, 2104\, New Zealand GEO:-36.989674;174.885805 X-APPLE-STRUCTURED-LOCATION;VALUE=URI;X-ADDRESS=HERA House 17-19 Gladding Place Manukau Auckland AKL 2104 New Zealand;X-APPLE-RADIUS=500;X-TITLE=17-19 Gladding Place\, Manukau:geo:174.885805,-36.989674 CATEGORIES:Courses,Seminars ATTACH;FMTTYPE=image/jpeg:https://www.hera.org.nz/wp-content/uploads/Test.jpg ORGANIZER;CN="Alan%20McClintock":MAILTO:alan.mcclintock@hera.org.nz END:VEVENT BEGIN:VEVENT DTSTART;TZID=UTC+13:20190610T090000 DTEND;TZID=UTC+13:20190611T170000 DTSTAMP:20190323T132132 CREATED:20190207T231226Z LAST-MODIFIED:20190308T000115Z UID:8727-1560157200-1560272400@www.hera.org.nz SUMMARY:Improve your business significantly with Bottleneck Analysis - June\, Auckland DESCRIPTION:[vc_row][vc_column][vc_column_text] \nHERA | Bottleneck Analysis seminar | Auckland | Limited seats available\n10 – 11 June\n[/vc_column_text][/vc_column][/vc_row][vc_row][vc_column][vc_tta_tabs][vc_tta_section title=”Overview” tab_id=”1549582178573-ee1c19b4-4f34″][vc_row_inner][vc_column_inner width=”1/2″][vc_column_text]About the event \nThis two-day workshop introduces the Theory of Constraints (TOC) concepts to attendees to give them a strong grasp of its application and potential. \nCovering TOC for operations\, project management\, logistics and making financial decisions\, this workshop is enhanced through practical case studies\, and design templates for practical application. \nAfter the workshop\, we’ll also offer attendees the support to implement TOC concepts into their organisation via our trained HERA facilitators.[/vc_column_text][/vc_column_inner][vc_column_inner width=”1/2″][vc_single_image image=”8916″ img_size=”full” add_caption=”yes” onclick=”custom_link” img_link_target=”_blank” link=”https://youtu.be/mWh0cSsNmGY”][/vc_column_inner][/vc_row_inner][vc_row_inner][vc_column_inner][vc_column_text]Why attend? \nThis workshop demonstrates how TOC can lift productivity through systems thinking – so you can significantly improve delivery time\, production lead time\, cost\, quality and excellence. \nTOC is a systems approach for the fabrication\, construction\, manufacturing\, asset management and maintenance industries.  It challenges some of the root beliefs that drives current measures and behaviours and offers powerful alternatives to existing methods. \nIt’ll demonstrate why and how it’s possible for the same factory\, infrastructure\, people and equipment to produce at least 20% more by doing things differently.  Ultimately\, attendees will be challenged to change the way they think\, plan\, measure and execute their operations.  The physical work will be the same\, but the way it is streamlined will be different. \nSignificant improvements have been demonstrated around the world – and this shift and trend is growing rapidly.  If you’re searching for significant value add achieved with far less stress and pressure for all – then this course is for you![/vc_column_text][vc_column_text]Who should attend? \nThis course is suited for Business and/or Operational Leaders; Financial\, Planning\, Training\, Technical Services\, Sales\, People or Quality Assurance Managers; as well as Operational Supervisors.[/vc_column_text][/vc_column_inner][/vc_row_inner][/vc_tta_section][vc_tta_section title=”Day 1″ tab_id=”1549582857915-ec0df5cd-6745″][vc_column_text] \n\n\n\nDay 1\n\n\n09:00 – 10:30\nTOC Frame of Reference – Variation and Interdependence in Operations. \n– The TOC Framework & 3 Bottle metaphor \n– The impact of variation and interdependence \n– A new look at the common way of doing work \n– Understand the real cause of our problems – our thinking \n– A surprising conclusion. \n \n\n\n10:45 – 13:00\nOptimised Flow\, Drum Buffer Rope\, – the TOC solution for Operational Flow. \n– Applying the systems approach to the business \n– A new way of setting up the organisation\, a new way of planning  & execution of operations \n– How to manage bottlenecks\, focus activities and the flow of revenue \n– Buffers & protective capacity. \n \n\n\n\nLunch \n \n\n\n14:00 – 15:00\nCritical Chain – the TOC solution for Project Execution. \n– Understanding the biggest cause of poor project due date performance \n– Managing human behaviour to improve project execution \n– Dealing with the real cause of late delivery and how to finish projects faster than planned \n– Single projects and Multiple projects \n– Job shop environments \n \n\n\n15:00 – 16:00\nReplenishment – the TOC solution for Supply Chain. \n– Discovering the flaws of the typical forecasting system \n– Switching from Push to Pull systems \n– Replenishment on actual consumption & buffer management \n– Higher availability with lower stock levels \n– A proven alternative to forecasting. \n \n\n\n16:15 – 17:00\nFinance & Measurements the TOC Way – Throughput Accounting. \n– A new way of looking at managerial finances \n– An Alternative to the concept of product cost; revenue leverage \n– Identifying the leverage that determines flow of revenue.\n\n\n\n[/vc_column_text][/vc_tta_section][vc_tta_section title=”Day 2″ tab_id=”1547775862746-b911d238-8eed”][vc_column_text] \n\n\n\n  \n\n\n\n Day 2\n\n\n\n09:00 – 09:30\nOverview from Day 1 & Reflection \n– Reflect on the learnings and insights from Day 1\n\n\n09:30 – 10:30\nPractical Application of TOC Solutions – Ops Room\, Measurements\, Marketing. \n– Dealing with day-to-day execution more effectively. \n– Setting up an organisation for calmness\, reflection and good communication with less information and meetings \n– Making new offers to the market \nComparisons with some other improvement approaches. \n– Comparing TOC\, Six Sigma and Lean Manufacturing.\n\n\n10:45 – 11:45\nCase study: Operations \n– Kolomela Mine\n\n\n11:45 – 12:30\nCase study: Project Management \n– Refractory Kiln rebuild\n\n\n12:30 – 13:00\nCase study: Logistics \n– Ampaglas Plastic sheet extrusions\n\n\n \nLunch\n\n\n14:00 – 15:30\nTemplate for the Application of TOC for Fabrication and Construction \n– Applying The 5 Focusing steps \n– The Critical Chain approach \n– Buffer management\, measures and behaviours      \n\n\n16:00 – 17:00\nConclusion:  Vision for going forward \n– Invite for interested companies to apply this technology with the assistance of HERA\n\n\n\n\n\n\n\n[/vc_column_text][/vc_tta_section][vc_tta_section title=”Presenter” tab_id=”1524459413493-f2fac342-5e13″][vc_row_inner][vc_column_inner width=”1/4″][vc_single_image image=”8741″ img_size=”full”][/vc_column_inner][vc_column_inner width=”3/4″][vc_column_text]Arrie van Niekerk | Tavanec CEO \nI have over 25 years’ experience with the application of the TOC Production Flow approach. My company has successfully applied it into more than 100 operations in many parts of the world\, delivering remarkable results. \nMy expertise lies in finding unique solutions for production flow lines in manufacturing\, fabrication\, construction\, asset management and maintenance – covering a range of activities related to iron and steel making\, as well as iron ore\, coal and other raw material mines. \nHolding a B Eng Hons (Metallurgy) from the University of Pretoria I’ve been the Head of the Welding Research Facility for ISCOR Ltd rising to General Manager of Research and Development\,  and Works Manager of Iscor Refractories during my time there.  Here I was able to implement TOC to reduce production lead time from 22 weeks with 60% on time performance to six weeks lead time with 92% on time performance over a nine month period. \nCompanies I’ve worked with as a specialist facilitator of TOC  include Goldfields\, Exxaro\, Kumba Iron ore\, Anglo American\, Norilsk SA\, Metorex\, Kazakhmys\, De Beers\, Anglo Platinum\, Avmin\, Implats\, Lonmin\, Teal Exploration & Mining\, Lonmin\, Glencore. \n[/vc_column_text][/vc_column_inner][/vc_row_inner][/vc_tta_section][vc_tta_section title=”Testimonials” tab_id=”1525907868972-ac6c9c8c-4f92″][vc_row_inner][vc_column_inner width=”2/3″][vc_column_text] \n“Our work has been valuable to 3M\, AEL\, Ampaglas\, Anglo American\, Arcellor Mittal\, BLSA\, De Beers\, Exxaro\, Goldfields\, Implats\, Kazakhmys\, Kumba Iron Ore\, Lonmin\, Pharma Natura\, Intercare and many other companies.  Some have experienced up to 40% improvement in output within a matter of months.\n[/vc_column_text][/vc_column_inner][vc_column_inner width=”1/3″][vc_single_image image=”8742″ img_size=”full” add_caption=”yes” style=”vc_box_shadow” onclick=”custom_link” img_link_target=”_blank” link=”https://www.hera.org.nz/wp-content/uploads/Brochure-for-Oiledwheels-Fabrication.pdf”][/vc_column_inner][/vc_row_inner][/vc_tta_section][vc_tta_section title=”Cost” tab_id=”1500872991069-d507152e-87b4″][vc_row_inner][vc_column_inner width=”1/3″] \n$990 \n[vc_column_text] \nHERA Ordinary Platinum member \n45% discount \n[/vc_column_text][/vc_column_inner][vc_column_inner width=”1/3″] \n$1\,530 \n[vc_column_text] \nHERA Associate  or Affiliate member \n15% discount \n[/vc_column_text][/vc_column_inner][vc_column_inner width=”1/3″] \n$1\,800 \n[vc_column_text] \nNon members \nFull price \n[/vc_column_text][/vc_column_inner][/vc_row_inner][vc_row_inner][vc_column_inner][vc_empty_space][vc_column_text] \n\nAll prices are inclusive of GST\n\n  \nWant to get a HERA membership discount\, but aren’t a member? \nFind out how to become one today.  Or contact our Manager Members Services and Support Brian Low for a chat. \nNot only will this reduce your course fees for your business\, but also for any of your employees throughout the year. And depending on the tier of membership you choose you can also enjoy discounts on offered resources and other membership benefits as well.[/vc_column_text][/vc_column_inner][/vc_row_inner][vc_column_text][/vc_column_text][vc_separator border_width=”3″][/vc_tta_section][vc_tta_section title=”Location” tab_id=”1549581889098-2905ffa7-24b2″][vc_row_inner][vc_column_inner width=”1/2″][vc_column_text]Address \nHERA House \n17-19 Gladding Place \nManukau \nAuckland[/vc_column_text][/vc_column_inner][vc_column_inner width=”1/2″][vc_gmaps link=”#E-8_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”][/vc_column_inner][/vc_row_inner][/vc_tta_section][vc_tta_section title=”Register” tab_id=”1508113354455-7b0628c0-17fd”][vc_row_inner][vc_column_inner][vc_column_text]Bookings \nRegister today by simply filling out the online form below and we’ll take care of the rest![/vc_column_text][/vc_column_inner][/vc_row_inner][vc_row_inner][vc_column_inner][vc_column_text][/vc_column_text][/vc_column_inner][/vc_row_inner][/vc_tta_section][/vc_tta_tabs][/vc_column][/vc_row] \n URL:https://www.hera.org.nz/event/improve-your-business-significantly-with-bottleneck-analysis-auckland/ LOCATION:HERA House\, 17-19 Gladding Place\, Manukau\, Auckland\, AKL\, 2104\, New Zealand GEO:-36.989674;174.885805 X-APPLE-STRUCTURED-LOCATION;VALUE=URI;X-ADDRESS=HERA House 17-19 Gladding Place Manukau Auckland AKL 2104 New Zealand;X-APPLE-RADIUS=500;X-TITLE=17-19 Gladding Place\, Manukau:geo:174.885805,-36.989674 CATEGORIES:Courses ATTACH;FMTTYPE=image/jpeg:https://www.hera.org.nz/wp-content/uploads/08022019-Bottleneck-hero-image.jpg END:VEVENT BEGIN:VEVENT DTSTART;TZID=UTC+13:20190612T090000 DTEND;TZID=UTC+13:20190613T170000 DTSTAMP:20190323T132132 CREATED:20190218T221529Z LAST-MODIFIED:20190316T031054Z UID:8810-1560330000-1560445200@www.hera.org.nz SUMMARY:Improve your business significantly with Bottleneck Analysis - June\, Christchurch DESCRIPTION:[vc_row][vc_column][vc_column_text][/vc_column_text][vc_column_text] \nHERA | Bottleneck Analysis seminar | Christchurch | Limited seats available\n12-13 June\n[/vc_column_text][vc_column_text][/vc_column_text][vc_separator][/vc_column][/vc_row][vc_row][vc_column][vc_tta_tabs][vc_tta_section title=”Overview” tab_id=”1551999231402-bc127d0f-740c”][vc_row_inner][vc_column_inner width=”1/2″][vc_column_text]About the event \nThis two-day workshop introduces the Theory of Constraints (TOC) concepts to attendees to give them a strong grasp of its application and potential. \nCovering TOC for operations\, project management\, logistics and making financial decisions\, this workshop is enhanced through practical case studies\, and design templates for practical application. \nAfter the workshop\, we’ll also offer attendees the support to implement TOC concepts into their organisation via our trained HERA facilitators.[/vc_column_text][/vc_column_inner][vc_column_inner width=”1/2″][vc_single_image image=”8916″ img_size=”full” onclick=”custom_link” link=”https://www.youtube.com/watch?v=mWh0cSsNmGY&feature=youtu.be”][/vc_column_inner][/vc_row_inner][vc_row_inner][vc_column_inner][vc_column_text] \n\n\nWhy attend? \nThis workshop demonstrates how TOC can lift productivity through systems thinking – so you can significantly improve delivery time\, production lead time\, cost\, quality and excellence. \nTOC is a systems approach for the fabrication\, construction\, manufacturing\, asset management and maintenance industries.  It challenges some of the root beliefs that drives current measures and behaviours and offers powerful alternatives to existing methods. \nIt’ll demonstrate why and how it’s possible for the same factory\, infrastructure\, people and equipment to produce at least 20% more by doing things differently.  Ultimately\, attendees will be challenged to change the way they think\, plan\, measure and execute their operations.  The physical work will be the same\, but the way it is streamlined will be different. \nSignificant improvements have been demonstrated around the world – and this shift and trend is growing rapidly.  If you’re searching for significant value add achieved with far less stress and pressure for all – then this course is for you! \n\n\n[/vc_column_text][vc_column_text]Who should attend? \nThis course is suited for Business and/or Operational Leaders; Financial\, Planning\, Training\, Technical Services\, Sales\, People or Quality Assurance Managers; as well as Operational Supervisors.[/vc_column_text][/vc_column_inner][/vc_row_inner][/vc_tta_section][vc_tta_section title=”Day 1″ tab_id=”1549582857915-ec0df5cd-6745″][vc_column_text] \n\n\n\nDay 1\n\n\n09:00 – 10:30\nTOC Frame of Reference – Variation and Interdependence in Operations. \n– The TOC Framework & 3 Bottle metaphor \n– The impact of variation and interdependence \n– A new look at the common way of doing work \n– Understand the real cause of our problems – our thinking \n– A surprising conclusion. \n \n\n\n10:45 – 13:00\nOptimised Flow\, Drum Buffer Rope\, – the TOC solution for Operational Flow. \n– Applying the systems approach to the business \n– A new way of setting up the organisation\, a new way of planning  & execution of operations \n– How to manage bottlenecks\, focus activities and the flow of revenue \n– Buffers & protective capacity. \n \n\n\n\nLunch \n \n\n\n14:00 – 15:00\nCritical Chain – the TOC solution for Project Execution. \n– Understanding the biggest cause of poor project due date performance \n– Managing human behaviour to improve project execution \n– Dealing with the real cause of late delivery and how to finish projects faster than planned \n– Single projects and Multiple projects \n– Job shop environments \n \n\n\n15:00 – 16:00\nReplenishment – the TOC solution for Supply Chain. \n– Discovering the flaws of the typical forecasting system \n– Switching from Push to Pull systems \n– Replenishment on actual consumption & buffer management \n– Higher availability with lower stock levels \n– A proven alternative to forecasting. \n \n\n\n16:15 – 17:00\nFinance & Measurements the TOC Way – Throughput Accounting. \n– A new way of looking at managerial finances \n– An Alternative to the concept of product cost; revenue leverage \n– Identifying the leverage that determines flow of revenue.\n\n\n\n[/vc_column_text][/vc_tta_section][vc_tta_section title=”Day 2″ tab_id=”1547775862746-b911d238-8eed”][vc_column_text] \n\n\n\n  \n\n\n\n Day 2\n\n\n\n09:00 – 09:30\nOverview from Day 1 & Reflection \n– Reflect on the learnings and insights from Day 1\n\n\n09:30 – 10:30\nPractical Application of TOC Solutions – Ops Room\, Measurements\, Marketing. \n– Dealing with day-to-day execution more effectively. \n– Setting up an organisation for calmness\, reflection and good communication with less information and meetings \n– Making new offers to the market \nComparisons with some other improvement approaches. \n– Comparing TOC\, Six Sigma and Lean Manufacturing.\n\n\n10:45 – 11:45\nCase study: Operations \n– Kolomela Mine\n\n\n11:45 – 12:30\nCase study: Project Management \n– Refractory Kiln rebuild\n\n\n12:30 – 13:00\nCase study: Logistics \n– Ampaglas Plastic sheet extrusions\n\n\n \nLunch\n\n\n14:00 – 15:30\nTemplate for the Application of TOC for Fabrication and Construction \n– Applying The 5 Focusing steps \n– The Critical Chain approach \n– Buffer management\, measures and behaviours      \n\n\n16:00 – 17:00\nConclusion:  Vision for going forward \n– Invite for interested companies to apply this technology with the assistance of HERA\n\n\n\n\n\n\n\n[/vc_column_text][/vc_tta_section][vc_tta_section title=”Presenter” tab_id=”1524459413493-f2fac342-5e13″][vc_row_inner][vc_column_inner width=”1/4″][vc_single_image image=”8741″ img_size=”full”][/vc_column_inner][vc_column_inner width=”3/4″][vc_column_text]Arrie van Niekerk | Tavanec CEO \nI have over 25 years’ experience with the application of the TOC Production Flow approach. My company has successfully applied it into more than 100 operations in many parts of the world\, delivering remarkable results. \nMy expertise lies in finding unique solutions for production flow lines in manufacturing\, fabrication\, construction\, asset management and maintenance – covering a range of activities related to iron and steel making\, as well as iron ore\, coal and other raw material mines. \nHolding a B Eng Hons (Metallurgy) from the University of Pretoria I’ve been the Head of the Welding Research Facility for ISCOR Ltd rising to General Manager of Research and Development\,  and Works Manager of Iscor Refractories during my time there.  Here I was able to implement TOC to reduce production lead time from 22 weeks with 60% on time performance to six weeks lead time with 92% on time performance over a nine month period. \nCompanies I’ve worked with as a specialist facilitator of TOC  include Goldfields\, Exxaro\, Kumba Iron ore\, Anglo American\, Norilsk SA\, Metorex\, Kazakhmys\, De Beers\, Anglo Platinum\, Avmin\, Implats\, Lonmin\, Teal Exploration & Mining\, Lonmin\, Glencore. \n[/vc_column_text][/vc_column_inner][/vc_row_inner][/vc_tta_section][vc_tta_section title=”Testimonials” tab_id=”1525907868972-ac6c9c8c-4f92″][vc_row_inner][vc_column_inner width=”2/3″][vc_column_text] \n“Our work has been valuable to 3M\, AEL\, Ampaglas\, Anglo American\, Arcellor Mittal\, BLSA\, De Beers\, Exxaro\, Goldfields\, Implats\, Kazakhmys\, Kumba Iron Ore\, Lonmin\, Pharma Natura\, Intercare and many other companies.  Some have experienced up to 40% improvement in output within a matter of months.\n[/vc_column_text][/vc_column_inner][vc_column_inner width=”1/3″][vc_single_image image=”8742″ img_size=”full” add_caption=”yes” onclick=”custom_link” img_link_target=”_blank” link=”https://www.hera.org.nz/wp-content/uploads/Brochure-for-Oiledwheels-Fabrication.pdf”][/vc_column_inner][/vc_row_inner][/vc_tta_section][vc_tta_section title=”Cost” tab_id=”1500872991069-d507152e-87b4″][vc_row_inner][vc_column_inner width=”1/3″] \n$990 \n[vc_column_text] \nPlatinum / Ordinary members \n45% discount \n[/vc_column_text][/vc_column_inner][vc_column_inner width=”1/3″] \n$1\,530 \n[vc_column_text] \nHERA Associate  or Affiliate member \n15% discount \n[/vc_column_text][/vc_column_inner][vc_column_inner width=”1/3″] \n$1\,800 \n[vc_column_text] \nNon HERA member \nFull price \n[/vc_column_text][/vc_column_inner][/vc_row_inner][vc_row_inner][vc_column_inner][vc_empty_space][vc_column_text] \n\nAll prices are inclusive of GST\n\n  \nWant to get a HERA membership discount\, but aren’t a member? \nFind out how to become one today.  Or contact our Manager Members Services and Support Brian Low for a chat. \nNot only will this reduce your course fees for your business\, but also for any of your employees throughout the year. And depending on the tier of membership you choose you can also enjoy discounts on offered resources and other membership benefits as well.[/vc_column_text][/vc_column_inner][/vc_row_inner][/vc_tta_section][vc_tta_section title=”Location” tab_id=”1549581889098-2905ffa7-24b2″][vc_row_inner][vc_column_inner width=”1/2″][vc_column_text]Address \nTBC[/vc_column_text][/vc_column_inner][vc_column_inner width=”1/2″][vc_gmaps link=””][/vc_column_inner][/vc_row_inner][/vc_tta_section][vc_tta_section title=”Register” tab_id=”1508113354455-7b0628c0-17fd”][vc_row_inner][vc_column_inner][vc_column_text]Bookings \nRegister today by simply filling out the onine form below and we’ll take care of the rest![/vc_column_text][/vc_column_inner][/vc_row_inner][vc_row_inner][vc_column_inner][vc_column_text][/vc_column_text][/vc_column_inner][/vc_row_inner][/vc_tta_section][/vc_tta_tabs][/vc_column][/vc_row] \n URL:https://www.hera.org.nz/event/improve-your-business-significantly-with-bottleneck-analysis-christchurch/ LOCATION:AKL CATEGORIES:Courses ATTACH;FMTTYPE=image/jpeg:https://www.hera.org.nz/wp-content/uploads/08022019-Bottleneck-hero-image.jpg END:VEVENT BEGIN:VEVENT DTSTART;TZID=UTC+13:20190613T083000 DTEND;TZID=UTC+13:20191128T170000 DTSTAMP:20190323T132132 CREATED:20190118T020900Z LAST-MODIFIED:20190319T213009Z UID:8490-1560414600-1574960400@www.hera.org.nz SUMMARY:Innovation READY - Six day series DESCRIPTION:[vc_row][vc_column][vc_column_text] \nHERA | Innovation READY – A six day series over six months | Limited seats available |\n[/vc_column_text][vc_row_inner][vc_column_inner width=”2/3″][vc_column_text] \nOverview \nBased on “Lean Startup” methods\, the purpose of the Innovation READY program is to equip prospective Innovation Managers with the innovation theory required to prepare themselves and their businesses for implementing an innovation process. \nIt’ll also establish the required training for the Innovation SET and GO programs\, which are focused on putting learnings from Innovation READY into practice by progressing an actual product through the commercialism process. Participants will become entrepreneurs for their businesses. \n[/vc_column_text][/vc_column_inner][vc_column_inner width=”1/3″][vc_single_image image=”8625″ img_size=”full” alignment=”right”][/vc_column_inner][/vc_row_inner][/vc_column][/vc_row][vc_row][vc_column][vc_tta_tabs][vc_tta_section title=”Day 1 ” tab_id=”1524522430413-398f4c15-9ae6″][vc_row_inner][vc_column_inner width=”1/2″][vc_column_text]Innovation READY Day 1: Creating the innovation mindset \nYou’ll come away with a deeper understanding of what a Lean Startup innovation culture requires. Identifying challenges you’ll have to overcome to implement this\, along with a plan to do so. You’ll also gain the leadership capabilities needed to lead change and create alignment and buy-in within your organisation\, and the communication skills to create and foster this change. Once done\, you’ll develop the courage and ability to have tough and honest conversations. Get READY to become the ‘game changer’ for your company’s commercial success.[/vc_column_text][/vc_column_inner][vc_column_inner width=”1/2″][vc_single_image image=”8619″ img_size=”full”][/vc_column_inner][/vc_row_inner][vc_row_inner][vc_column_inner][vc_column_text]Outcomes: \n\nAn understanding of what a Lean Startup innovation culture would require.\nIdentifying specific challenges for them to implement this\, along with a plan to do so.\nLeadership capabilities to lead change and create alignment and buy-in.\nCommunication skills to create/foster change.\nAbility to have tough and honest conversations.\nPeer network to support them through this process.\nDeveloping courage.\n\n[/vc_column_text][/vc_column_inner][/vc_row_inner][/vc_tta_section][vc_tta_section title=”Day 2 ” tab_id=”1547775859458-b47812b3-b09e”][vc_row_inner][vc_column_inner width=”1/2″][vc_column_text] \n\n\nInnovation READY: Day 2 – The innovation process \nThe learning focus is on the creation of a lean evaluation process where you’ll learn all about opening and closing gates\, number of gates or innovation stages and levels\, portfolio versus product and more. By the end of the day\, you’ll be confident in understanding what should happen in each stage gate and what the stop/go/pivot points are. You’ll also be given an identification process to understand who “gate-keepers” are\, and key evaluation criteria. \nMost importantly\, you’ll learn how to tailor all of this innovation process learning to better suit your business\, and be armed with the tools required for project or portfolio evaluations. \n\n\n[/vc_column_text][/vc_column_inner][vc_column_inner width=”1/2″][vc_single_image image=”7335″ img_size=”full”][/vc_column_inner][/vc_row_inner][vc_row_inner][vc_column_inner][vc_column_text] \n\nMoving forward\, you’ll be able to identify priority projects using these evaluations\, and quickly discern what a healthy portfolio looks like in terms of number of projects\, size\, risk\, and level of innovation. Not only that\, but you’ll be able ti implement bench-marking and best practice into your company’s commercial success.\n\n[/vc_column_text][/vc_column_inner][/vc_row_inner][/vc_tta_section][vc_tta_section title=”Day 3″ tab_id=”1547775860538-59a46ba7-d5c2″][vc_row_inner][vc_column_inner width=”1/2″][vc_column_text] \n\n\nInnovation READY Day 3: Ideation \nThe learning focus is on understanding customer value propositions and the minimal viable product. You’ll learn how to build iterative learning cycles within their processes and the importance of knowledge. You’ll also learn the tools for growing a culture of innovation within your organisation. \nOf importance will be for you to understand customer discovery – what is it and why do we do it? \n  \n\n\n[/vc_column_text][/vc_column_inner][vc_column_inner width=”1/2″][vc_single_image image=”8618″ img_size=”full”][/vc_column_inner][/vc_row_inner][/vc_tta_section][vc_tta_section title=”Day 4 ” tab_id=”1547775861340-1b0d07e1-d424″][vc_row_inner][vc_column_inner width=”1/2″][vc_column_text]Innovation READY Day 4: Innovation Metrics \nThe learning focus is on financial assessment methods\, commercial potential (determine market size and share)\, technical and strategic assessment and finally determine whether to pivot or perish with the idea. \n  \nOutcomes \n\nAbility to measure performance and potential of an idea against evaluation criteria.\nAbility to identify what metrics will be important for your business.\nExcel tools to calculate financial assessments.\n\n[/vc_column_text][/vc_column_inner][vc_column_inner width=”1/2″][vc_single_image image=”8933″ img_size=”full”][/vc_column_inner][/vc_row_inner][/vc_tta_section][vc_tta_section title=”Day 5″ tab_id=”1547775862096-a748567b-1ae9″][vc_row_inner][vc_column_inner width=”1/2″][vc_column_text]Innovation Ready Day 5: Preparing an innovation strategy \nIn this session\, we will help you identify innovation themes for your business and create a three-year innovation plan. It will show you how to plan for innovation within your business by creating alignment within your business and the importance of not over planning (using lean startup principles to test and learn instead). \nThis will culminate all your learnings through the course and be a key outcome to take back to your team and workplace.[/vc_column_text][/vc_column_inner][vc_column_inner width=”1/2″][vc_single_image image=”8706″ img_size=”full”][/vc_column_inner][/vc_row_inner][/vc_tta_section][vc_tta_section title=”Day 6 ” tab_id=”1547775862746-b911d238-8eed”][vc_row_inner][vc_column_inner width=”1/2″][vc_column_text]Innovation Ready Day 6: Building a culture of innovation and productivity \nThe learning focus will be on how to build a highly engaged workforce and understand the value of a coaching culture. Culture is hard to change for which we need to focus on behaviour and mindset first. In this session\, we will go through the three types of conversation that are required to enable positive mindset change. We will learn when and how to have these conversations as the starting point which will help build great cultures day by day one conversation at a time.[/vc_column_text][/vc_column_inner][vc_column_inner width=”1/2″][vc_single_image image=”8708″ img_size=”full”][/vc_column_inner][/vc_row_inner][/vc_tta_section][vc_tta_section title=”Presenters” tab_id=”1524459413493-f2fac342-5e13″][vc_row_inner][vc_column_inner width=”1/4″][vc_single_image image=”6377″ img_size=”full”][/vc_column_inner][vc_column_inner width=”3/4″][vc_column_text]Adrian Packer | IMS Projects Director \nI established IMS Projects in the UK in 2004 and quickly gained a reputation for a collaborative and outcome focused approach that delivers business success through people. Today\, it is a respected provider of high-quality\, innovative programmes and services that help Kiwi companies and their employees achieve world class levels of operational performance. Our services include strategy and planning\, operational excellence\, innovation and new product development. \nI’ve worked in a wide variety of sectors including manufacturing\, food and beverage\, oil and gas\, utilities\, health local and central government and retail. Companies I’ve worked with include Argus Heating\, Goodman Fielder\, Southern Cross Engineering and Allied Concrete. \nI’m also one of only a handful of coaches and trainers in the world certified as a Master NLP Practitioner\, Lean Six Sigma Black Belt and certified coach. I hold an MBA from Cranfield School of Management in the UK.[/vc_column_text][/vc_column_inner][/vc_row_inner][/vc_tta_section][vc_tta_section title=”Testimonials” tab_id=”1525907868972-ac6c9c8c-4f92″][vc_column_text]Cam Gordon\, Dam Safety & Civil Engineering Manager\, Genesis Energy  \n‘At a large heavy industry company like Genesis\, innovation can be a slow process. We are already innovating by introducing agile methodologies and increasing the use of data and digital technology.  But embedding innovation led techniques is always challenging. Innovation Ready certainly made me think more deeply about how we could change things for the better. I found attending this course to be very useful.’[/vc_column_text][vc_column_text]Peter Swan\, Business Development Manager\, Page & Macrae Engineering \n‘We at Page and Macrae have shown innovation initiative over many years and projects however it was just what we brought to the table every day. To gain consistency and structured innovation processes is an essential step to avoid possible disruption and maximise our chances of continued success in the markets of the future. Also the challenge of constantly balancing BAU with innovation projects is not easy to handle. This course has encouraged me in many ways to keep doing what I’m doing as well as informed me with tools and insights on how to make innovation a more integral aspect of our work culture. Already now part of Innovation Set & Go\, I’m excited about learning how to apply these tools in my work place as well.’[/vc_column_text][vc_column_text]Cliff Ellery\, GM – Innovation Centre of Excellence\, NDA \n‘I found Innovation Ready to be just the kind of training programme we need right now. This is what our industry needs to prepare ourselves for a disruptive environment demanding skills in innovation. I’m in the next phase of Innovation Set & Go this year and am looking forward to how to apply tools and skills towards commercialisation. I’d recommend other engineering firms also consider this as a must attend course if they are serious about their future’[/vc_column_text][vc_column_text]Pam Roa\, Managing Director\, Longveld \n‘At Longveld we take it for granted that we can expect disruption of every aspect of our business in the near future and we need to prepare ourselves. Attending a course such as Innovation Ready was very useful for us in providing a forum for discussion and testing of ideas with our wider industry colleagues. We found the mix of theory and practical examples to be very effective in clarifying how to build MVPs and how to understand innovation better. Taking the time out regularly to look beyond business as usual is really important.’[/vc_column_text][vc_column_text]Graeme Warren\, MB Century \nMB Century has an innovative culture and supports innovation initiatives of all kinds. We support Innovation Ready which is a great initiative for our industry. Introducing new thinking in traditional industries is never easy and this course attempts to do that. I found that the course used interactive workshops and practice sessions to demonstrate the theoretical concepts and tools introduced around innovation.[/vc_column_text][/vc_tta_section][vc_tta_section title=”Cost and location” tab_id=”1500872991069-d507152e-87b4″][vc_row_inner][vc_column_inner][vc_column_text]This is an exclusive member’s only course – and highly subsidised by HERA for attendees! \nPrices below are for the whole Innovation-READY course program which includes 6 full day sessions delivered consecutively over 6 months.[/vc_column_text][vc_empty_space][/vc_column_inner][/vc_row_inner][vc_row_inner][vc_column_inner width=”1/2″] \n$3450 \n[vc_column_text] \nHERA Ordinary Platinum member \n45% discount \n[/vc_column_text][/vc_column_inner][vc_column_inner width=”1/2″] \n$4700 \n[vc_column_text] \nHERA Associate or Affiliate Gold Member \n25% discount \n[/vc_column_text][/vc_column_inner][/vc_row_inner]\nFee’s include course costs\, tea & coffee\, lunch and an exclusive networking session at the close of the course day\nAll prices include GST\n\n[vc_empty_space][vc_separator border_width=”3″][vc_row_inner][vc_column_inner][vc_column_text]HERA subsidation \nWe are offering this at a highly subsidised price because we believe in the importance of our members upskilling to innovate if we’re to create a sustainable advantage for our New Zealand metals-based engineering industry globally. \nParticipants outside of HERA would look to pay in excess of $8000+gst with other institutions and training facilities\, however we’re offering to cover a large portion of this to selected participants\, covering from $3800 – $5750 of this fee (depending on your membership status). \nWe’ll also be offering a select number of ‘standout’ participants the opportunity to continue through the program to gain one on one assistance to take an actual idea to commercialisation for their business. \n  \nNZTE Subsidation \nMembers can also directly apply to NZTE to have this course fee further reduced by 50% – provided they meet the criteria of having 50 or less full time employees at time of application. Indicative pricing with this discount applied is below:[/vc_column_text][vc_empty_space][/vc_column_inner][/vc_row_inner][vc_row_inner][vc_column_inner width=”1/3″] \n$1725 \n[vc_column_text] \nOur Ordinary members \n[/vc_column_text][/vc_column_inner][vc_column_inner width=”1/3″] \n$2350 \n[vc_column_text] \nOur Affiliate members \n[/vc_column_text][/vc_column_inner][vc_column_inner width=”1/3″] \n$2667.50 \n[vc_column_text] \nOur Associate members \n[/vc_column_text][/vc_column_inner][/vc_row_inner][vc_empty_space][vc_column_text]Still seems too much? \nPlease don’t let price be the deciding factor in attending or not. Talk to our General Manager Industry Development Dr Boaz Habib to see how we can make this work for you. \n  \nNot a HERA member? \nPlease note it’s not too late to become a member to secure better course pricing discounts! \nFind out how to become a member today or email our Manager Membership Services and Support Brian Low to discuss further.[/vc_column_text][vc_empty_space height=”22px”][vc_separator border_width=”3″][vc_empty_space height=”22px”][vc_row_inner][vc_column_inner width=”1/2″][vc_column_text]Address \nHERA House \n17-19 Gladding Place\, Manukau \nAuckland 2104[/vc_column_text][/vc_column_inner][vc_column_inner width=”1/2″][vc_gmaps link=”#E-8_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”][/vc_column_inner][/vc_row_inner][vc_column_text][/vc_column_text][/vc_tta_section][vc_tta_section title=”Register” tab_id=”1508113354455-7b0628c0-17fd”][vc_row_inner][vc_column_inner width=”1/2″][vc_column_text]Bookings \nRegister today by simply filling out the online form below and we’ll take care of the rest! \nHave questions? Contact our General Manager Industry Development Dr Boaz Habib.[/vc_column_text][/vc_column_inner][vc_column_inner width=”1/2″]Earlybird Special!!!! \n$200 discount \nRegister before 13th May[/vc_column_inner][/vc_row_inner][vc_row_inner][vc_column_inner][vc_column_text][/vc_column_text][/vc_column_inner][/vc_row_inner][/vc_tta_section][/vc_tta_tabs][/vc_column][/vc_row] \n URL:https://www.hera.org.nz/event/innovation-ready-set-go-2/ LOCATION:HERA House\, 17-19 Gladding Place\, Manukau\, Auckland\, AKL\, 2104\, New Zealand GEO:-36.989674;174.885805 X-APPLE-STRUCTURED-LOCATION;VALUE=URI;X-ADDRESS=HERA House 17-19 Gladding Place Manukau Auckland AKL 2104 New Zealand;X-APPLE-RADIUS=500;X-TITLE=17-19 Gladding Place\, Manukau:geo:174.885805,-36.989674 CATEGORIES:Courses ATTACH;FMTTYPE=image/jpeg:https://www.hera.org.nz/wp-content/uploads/DSC_7804.jpg ORGANIZER;CN="Boaz%20Habib":MAILTO:boaz.habib@hera.org.nz END:VEVENT BEGIN:VEVENT DTSTART;VALUE=DATE:20190819 DTEND;VALUE=DATE:20190824 DTSTAMP:20190323T132132 CREATED:20180612T020252Z LAST-MODIFIED:20190319T212843Z UID:6777-1566172800-1566604799@www.hera.org.nz SUMMARY:Welding Supervisor | Welding Inspection Part 1 - Auckland DESCRIPTION:[vc_row][vc_column][vc_column_text] \nAuckland | 1 week course | 19th – 23th August\n| From $1\,465\n  \n\n[/vc_column_text][/vc_column][/vc_row][vc_row][vc_column][vc_tta_tabs][vc_tta_section title=”Overview” tab_id=”1507504978378-28d23973-da60″][vc_row_inner][vc_column_inner]About this course \nThe course leads to qualification as a welding supervisor and also serves as Part 1 of the training for welding inspector as described below: \n\nWelding Supervisor qualification AS 2214-2004: Certification of welding supervisors – Structural steel welding is required for structural steel fabrication to AS/NZS 1554. The course also ideal for those in a supervisory role who require an in-depth understanding of quality management systems for structural steel welding\, and for fabricators wishing to join the Steel Fabricator Certification (SFC) scheme.\nFor those seeking a qualification in welding inspection the course covers:\n\n\nThe Welding Technology module (WT1) for the IIW International Welding Inspector qualifications IWI-B and IWI-S.\nThe welding technology “Knowledge Requirements” for the CBIP Certified Welding Inspector CBIP Standard of Proficiency for the Certification of Welding Inspectors (Doc. No PRO-CER-07).\n\n[/vc_column_inner][/vc_row_inner][/vc_tta_section][vc_tta_section title=”Content” tab_id=”1500872968486-7aded090-5045″]The welding supervisor course covers the scope of welding supervision activities including: \n\nThe role and responsibilities of the welding supervisor\nWelding processes\nWelding procedure qualification\nWelding metallurgy\nConstruction and design\nWelder qualification\nFabrication and welding for seismic applications\nCompliance with relevant welding standards as well as quality management aspects e.g. AS/NZS 1554\, AS/NZS 5131\, AS/NZS 3834\, AS/NZS ISO 9606.1\, and AS/NZS 2980.\n\n[/vc_tta_section][vc_tta_section title=”Requirements” tab_id=”1548892547474-9d6c453c-afd4″]\nThis course requires proficiency in the comprehension and writing of English as used in the engineering industry\, in basic mathematics\, and the ability to write reports.\nThe course can be attended by anyone who wishes to achieve qualification or who requires an in-depth understanding of structural steel welding and the associated standards. There are no course access conditions for those who do not wish take the examinations.\nTo take the examinations candidates must comply with prerequisites listed below:\n\n\nFor AS 2214 the exam prerequisites are three years approved practical experience in either:\n\ni. the fabrication engineering industry\, or \nii. the supervision or inspection of welding\, or \niii. a qualification in either engineering\, metallurgy or welding\, and three years approved experience related to the practical application of welding. \nFor those wishing to gain Part 1 (Module WT) of the IIW International Welding Inspector qualification\, course access conditions are relevant work experience in the metals industry\, and to be at least 20 years of age. \n\nA minimum of 3 years practical work experience in the metals industry\nProficiency in English in both comprehension and writing of reports\nTechnical understanding of the engineering industry\nBasic math skills\n\n[/vc_tta_section][vc_tta_section title=”Outline” tab_id=”1548892587484-4dc978b8-5d33″][vc_column_text] \n\n\nCOURSE DELIVERY \n\nOne week full time course (40 hours)\, plus\nDistance Learning (60 hours) and examination preparation. This part of the course is to be completed following the one week course and is undertaken on the HERA eLearning website.\n\nDaily programme: \n\n8:20am – 4:30pm\n\n\n10:00am – Morning tea\n12:00 – 12.45pm – Lunch\n14:15pm – Afternoon tea\n\nMorning – afternoon teas & comprehensive course notes provided by HERA \n\n\n\n\nExams and assessments \nFor those wishing to gain AS 2214 and the Welding Technology 1 Module (WT1) for IIW welding inspectors: \n\nCourse attendance and completion of the Distance Learning assignments is required\, and\nTwo Examinations:\n\n\nPaper A Welding Theory and Technology: 3 hour exam.\nExamination Paper B Application of Standards: 2 hour exam.\n\nExamination dates are: \n\nAuckland 12 April 2019\nChristchurch 17 April 2019\n\nThere are no exam or course requirements for those seeking the CBIP Certified Welding Inspector. \nOptional & follow on courses \n\nOne day WT1 Refresher and Exam preparation course (optional)\nWelding Inspection Part 2\n\n\n\n[/vc_column_text][/vc_tta_section][vc_tta_section title=”What you get” tab_id=”1507505569167-e2129af4-9ea4″][vc_column_text]AS 2214 Structural Steel Welding Supervisor \n\nThe key to allowing people working or wishing to work in a supervisory role in structural steel fabrication to gain the necessary knowledge to competently liaise with key stakeholders and economically and efficiently meet customer requirements and welding quality control standards.\nIIW IWI Welding Technology Module WT1\nWe’re New Zealand’s only International Institute of Welding (IIW) Authorised National Body\, running under HERA-ANB\nQuality management systems\nThis course provides an overview of  AS/NZS ISO 3834 Quality requirements for fusion welding of metallic materials\, and AS/NZS 5131 Structural steelwork—Fabrication and Erection assisting you to meet an increasingly requirement in construction specifications.\nOnline training modules\nYou now can complete the Distance Learning component of the course and prepare for exams in the comfort of your own home at your own pace. All by logging in using your personal username.\nSmall classes\nWe keep our classes small so that you’re really looked after no matter what your skill level.\nPathway to national and international qualifications and the SFC scheme\nOur courses are structured to give you the most for your time. Allowing you to be qualified to meet New Zealand standards and also pursue opportunities with qualifications recognised overseas. Not only that – but it is a key mechanism in obtaining SFC Scheme certification!\nFabrication and welding for seismic applications\nNew Zealand is a seismically active zone requiring special welding and fabrication considerations to AS/NZS 5131 and to AS/NZS 1554. Our course explains these requirements\, giving your employee confidence you can deliver to this required standard.\nEmail support\nWe’re here to support you online up to your exam.  We’ll connect you to the HERA Training Centre email address. So you can ask for help as you need it.\nExclusive courseware\nThe course notes provide helpful support material for your studies to ensure you have relevant content to refer to once your course is completed.\n\n[/vc_column_text][/vc_tta_section][vc_tta_section title=”Testimonials” tab_id=”1507504659321-72e51b71-5f23″][vc_row_inner][vc_column_inner][vc_column_text]Here’s some of what others are saying about our fantastic offerings in welding inspection and supervisor course offering:[/vc_column_text][/vc_column_inner][/vc_row_inner][vc_row_inner][vc_column_inner width=”1/2″][vc_column_text]“This course was really informative – the information is good\, clear and detailed.” \n[/vc_column_text][vc_column_text]“Very knowledgeable presenters.” \n[/vc_column_text][/vc_column_inner][vc_column_inner width=”1/2″][vc_column_text]“A very good course – in fact\, one of the best I’ve been on.” \n[/vc_column_text][vc_column_text]“A great program with excellent presentation.” \n[/vc_column_text][/vc_column_inner][/vc_row_inner][/vc_tta_section][vc_tta_section title=”Location” tab_id=”1518146612623-d303a88f-95f4″][vc_row_inner][vc_column_inner width=”1/2″][vc_column_text]Address \nHERA House \n17-19 Gladding Place \nManukau \nAuckland[/vc_column_text][/vc_column_inner][vc_column_inner width=”1/2″][vc_gmaps link=”#E-8_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”][/vc_column_inner][/vc_row_inner][/vc_tta_section][vc_tta_section title=”Prices” tab_id=”1500872991069-d507152e-87b4″][vc_column_text]All prices include GST.[/vc_column_text][vc_row_inner][vc_column_inner width=”1/3″] \n$1\,465 \n[/vc_column_inner][vc_column_inner width=”1/3″] \n$2270 \n[/vc_column_inner][vc_column_inner width=”1/3″] \n$2670 \n[/vc_column_inner][/vc_row_inner][vc_row_inner][vc_column_inner width=”1/3″][vc_column_text] \nHERA Ordinary Platinum member \n45% off \n[/vc_column_text][/vc_column_inner][vc_column_inner width=”1/3″][vc_column_text] \nHERA Affiliate or Associate Gold members \n15% off \n[/vc_column_text][/vc_column_inner][vc_column_inner width=”1/3″][vc_column_text] \nNon HERA member \n[/vc_column_text][/vc_column_inner][/vc_row_inner][vc_separator border_width=”3″][vc_empty_space height=”50px”][vc_column_text]**The AS 2214 / IIW Inspector Part 1 exam fee’s not included in the course fees. \n  \n\nAll prices are inclusive of GST\n\nNon Members \nIf you’re not a HERA member already-yo should seriously consider joining our association! \nNot only will this reduce your course fees nor for your business\, but also for any of your employess throughout the year. And depending on the tier of membership you choose you can also enjoy discounts on offered resources and other membership benifts as well \nFor more information please go to  https://www.hera.org.nz/become-a-member/ or email Brain Low @ brian.low@hera.org.nz[/vc_column_text][/vc_tta_section][vc_tta_section title=”Register” tab_id=”1508113354455-7b0628c0-17fd”][vc_row_inner][vc_column_inner width=”2/3″][vc_column_text]Bookings \nSimply fill out this form to register\, and from here we’ll take care of the rest! \nRegistrations close Tuesday 14th August \nFlights & accommodation \nIf you’ll be travelling to attend this course – accommodation and travel are your responsibility to organise. \n**Please do not making any bookings until you’ve received a confirmation email that the course is going ahead.[/vc_column_text][vc_column_text][/vc_column_text][/vc_column_inner][vc_column_inner width=”1/3″][/vc_column_inner][/vc_row_inner][/vc_tta_section][/vc_tta_tabs][/vc_column][/vc_row] \n URL:https://www.hera.org.nz/event/welding-supervisor-inspection-part1-auckland-2/ LOCATION:HERA House\, 17-19 Gladding Place\, Manukau\, Auckland\, AKL\, 2104\, New Zealand GEO:-36.989674;174.885805 X-APPLE-STRUCTURED-LOCATION;VALUE=URI;X-ADDRESS=HERA House 17-19 Gladding Place Manukau Auckland AKL 2104 New Zealand;X-APPLE-RADIUS=500;X-TITLE=17-19 Gladding Place\, Manukau:geo:174.885805,-36.989674 CATEGORIES:Conferences,Courses,Seminars ATTACH;FMTTYPE=image/jpeg:https://www.hera.org.nz/wp-content/uploads/20171106_Notice_WeldingofNonASNZSsteel_WELD.jpg ORGANIZER;CN="Alan%20McClintock":MAILTO:alan.mcclintock@hera.org.nz END:VEVENT BEGIN:VEVENT DTSTART;VALUE=DATE:20190826 DTEND;VALUE=DATE:20190831 DTSTAMP:20190323T132132 CREATED:20180618T040631Z LAST-MODIFIED:20190305T003748Z UID:6726-1566777600-1567209599@www.hera.org.nz SUMMARY:Welding Supervisor | Welding Inspection Part 1 - Christchurch DESCRIPTION:[vc_row][vc_column][vc_column_text] \nChristchurch | 1 week course | From $1\,465 | Limited spaces available\n26 – 30 August 2019\n[/vc_column_text][/vc_column][/vc_row][vc_row][vc_column][vc_tta_tabs][vc_tta_section title=”Overview” tab_id=”1507504978378-28d23973-da60″]About this course \nThe course leads to qualification as a welding supervisor and also serves as Part 1 of the training for welding inspector as described below: \n\nWelding Supervisor qualification AS 2214-2004: Certification of welding supervisors – Structural steel welding is required for structural steel fabrication to AS/NZS 1554. The course also ideal for those in a supervisory role who require an in-depth understanding of quality management systems for structural steel welding\, and for fabricators wishing to join the Steel Fabricator Certification (SFC) scheme.\nFor those seeking a qualification in welding inspection the course covers:\n\n\nThe Welding Technology module (WT1) for the IIW International Welding Inspector qualifications IWI-B and IWI-S.\nThe welding technology “Knowledge Requirements” for the CBIP Certified Welding Inspector CBIP Standard of Proficiency for the Certification of Welding Inspectors (Doc. No PRO-CER-07).\n\n[/vc_tta_section][vc_tta_section title=”Content” tab_id=”1548891813474-721e2353-c44d”]Course content \nThe welding supervisor course covers the scope of welding supervision activities including: \n\nThe role and responsibilities of the welding supervisor\nWelding processes\nWelding procedure qualification\nWelding metallurgy\nConstruction and design\nWelder qualification\nFabrication and welding for seismic applications\nCompliance with relevant welding standards as well as quality management aspects e.g. AS/NZS 1554\, AS/NZS 5131\, AS/NZS 3834\, AS/NZS ISO 9606.1\, and AS/NZS 2980.\n\n[/vc_tta_section][vc_tta_section title=”Requirements” tab_id=”1548891820449-0a604eb1-2045″]Course entry requirements \n\nThis course requires proficiency in the comprehension and writing of English as used in the engineering industry\, in basic mathematics\, and the ability to write reports.\nThe course can be attended by anyone who wishes to achieve qualification or who requires an in-depth understanding of structural steel welding and the associated standards. There are no course access conditions for those who do not wish take the examinations.\nTo take the examinations candidates must comply with prerequisites listed below:\n\n\nFor AS 2214 the exam prerequisites are three years approved practical experience in either:\n\ni. the fabrication engineering industry\, or \nii. the supervision or inspection of welding\, or \niii. a qualification in either engineering\, metallurgy or welding\, and three years approved experience related to the practical application of welding. \nFor those wishing to gain Part 1 (Module WT) of the IIW International Welding Inspector qualification\, course access conditions are relevant work experience in the metals industry\, and to be at least 20 years of age. \n\nA minimum of 3 years practical work experience in the metals industry\nProficiency in English in both comprehension and writing of reports\nTechnical understanding of the engineering industry\nBasic math skills\n\n[/vc_tta_section][vc_tta_section title=”Outline” tab_id=”1548891820539-424f9957-df06″][vc_column_text]COURSE DELIVERY \n\nOne week full time course (40 hours)\, plus\nDistance Learning (60 hours) and examination preparation. This part of the course is to be completed following the one week course and is undertaken on the HERA eLearning website.\n\nDaily programme: \n\n8:20am – 4:30pm\n\n\n10:00am – Morning tea\n12:00 – 12.45pm – Lunch\n14:15pm – Afternoon tea\n\nMorning – afternoon teas & comprehensive course notes provided by HERA[/vc_column_text][/vc_tta_section][vc_tta_section title=”What you get” tab_id=”1507505569167-e2129af4-9ea4″][vc_column_text]AS 2214 Structural Steel Welding Supervisor \n\nThe key to allowing people working or wishing to work in a supervisory role in structural steel fabrication to gain the necessary knowledge to competently liaise with key stakeholders and economically and efficiently meet customer requirements and welding quality control standards.\nIIW IWI Welding Technology Module WT1\nWe’re New Zealand’s only International Institute of Welding (IIW) Authorised National Body\, running under HERA-ANB\nQuality management systems\nThis course provides an overview of  AS/NZS ISO 3834 Quality requirements for fusion welding of metallic materials\, and AS/NZS 5131 Structural steelwork—Fabrication and Erection assisting you to meet an increasingly requirement in construction specifications.\nOnline training modules\nYou now can complete the Distance Learning component of the course and prepare for exams in the comfort of your own home at your own pace. All by logging in using your personal username.\nSmall classes\nWe keep our classes small so that you’re really looked after no matter what your skill level.\nPathway to national and international qualifications and the SFC scheme\nOur courses are structured to give you the most for your time. Allowing you to be qualified to meet New Zealand standards and also pursue opportunities with qualifications recognised overseas. Not only that – but it is a key mechanism in obtaining SFC Scheme certification!\nFabrication and welding for seismic applications\nNew Zealand is a seismically active zone requiring special welding and fabrication considerations to AS/NZS 5131 and to AS/NZS 1554. Our course explains these requirements\, giving your employee confidence you can deliver to this required standard.\nEmail support\nWe’re here to support you online up to your exam.  We’ll connect you to the HERA Training Centre email address. So you can ask for help as you need it.\nExclusive courseware\nThe course notes provide helpful support material for your studies to ensure you have relevant content to refer to once your course is completed.\n\n[/vc_column_text][/vc_tta_section][vc_tta_section title=”Testimonials” tab_id=”1507504659321-72e51b71-5f23″][vc_row_inner][vc_column_inner][vc_column_text]Here’s some of what others are saying about our fantastic offerings in welding inspection and supervisor course offering:[/vc_column_text][/vc_column_inner][/vc_row_inner][vc_row_inner][vc_column_inner width=”1/2″][vc_column_text]“This course was really informative – the information is good\, clear and detailed.” \n[/vc_column_text][vc_column_text]“Very knowledgeable presenters.” \n[/vc_column_text][/vc_column_inner][vc_column_inner width=”1/2″][vc_column_text]“A very good course – in fact\, one of the best I’ve been on.” \n[/vc_column_text][vc_column_text]“A great program with excellent presentation.” \n[/vc_column_text][/vc_column_inner][/vc_row_inner][/vc_tta_section][vc_tta_section title=”Location” tab_id=”1518146612623-d303a88f-95f4″][vc_row_inner][vc_column_inner width=”1/2″][vc_column_text]Address \nARA Institute (formally CPIT) \nWoolston Campus \nRoom VF101 in reception building VF \nEnsors Road \nChristchurch 8011[/vc_column_text][/vc_column_inner][vc_column_inner width=”1/2″][vc_gmaps link=”#E-8_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”][/vc_column_inner][/vc_row_inner][/vc_tta_section][vc_tta_section title=”Prices” tab_id=”1500872991069-d507152e-87b4″][vc_column_text][/vc_column_text][vc_row_inner][vc_column_inner width=”1/3″] \n$1465 \n[/vc_column_inner][vc_column_inner width=”1/3″] \n$2270 \n[/vc_column_inner][vc_column_inner width=”1/3″] \n$2670 \n[/vc_column_inner][/vc_row_inner][vc_row_inner][vc_column_inner width=”1/3″][vc_column_text] \nHERA Ordinary Platinum members \n45% discount \n[/vc_column_text][/vc_column_inner][vc_column_inner width=”1/3″][vc_column_text] \nHERA Associate or Associate Gold members \n15% off \n[/vc_column_text][/vc_column_inner][vc_column_inner width=”1/3″][vc_column_text] \nNon HERA member \n[/vc_column_text][/vc_column_inner][/vc_row_inner][vc_separator border_width=”3″][vc_empty_space][vc_column_text] \n\nAll prices are inclusive of GST\n\nNon Members \nIf you’re not a HERA member already-yo should seriously consider joining our association! \nNot only will this reduce your course fees nor for your business\, but also for any of your employess throughout the year. And depending on the tier of membership you choose you can also enjoy discounts on offered resources and other membership benifts as well \nFor more information please go to  https://www.hera.org.nz/become-a-member/ or email Brain Low @ brian.low@hera.org.nz[/vc_column_text][/vc_tta_section][vc_tta_section title=”Register” tab_id=”1508113354455-7b0628c0-17fd”][vc_row_inner][vc_column_inner width=”2/3″][vc_column_text]Bookings \nSimply fill out the form below\, and we’ll take care of the rest! \nRegistration closes 19th August 2019 \nFlights & accommodation \nIf you’ll be travelling to attend this course – accommodation and travel are your responsibility to organise. \n**Please do not making any bookings until you’ve received a confirmation email that the course is going ahead.[/vc_column_text][/vc_column_inner][vc_column_inner width=”1/3″][/vc_column_inner][/vc_row_inner][vc_row_inner][vc_column_inner][vc_column_text][/vc_column_text][/vc_column_inner][/vc_row_inner][/vc_tta_section][/vc_tta_tabs][/vc_column][/vc_row] \n URL:https://www.hera.org.nz/event/welding-supervisor-inspection-part1-chch/ LOCATION:ARA Institute of Canterbury (formerly CPIT)\, Ensors Road\, Woolston Campus\, Christchurch\, AKL\, New Zealand GEO:-43.548963;172.662522 X-APPLE-STRUCTURED-LOCATION;VALUE=URI;X-ADDRESS=ARA Institute of Canterbury (formerly CPIT) Ensors Road Woolston Campus Christchurch AKL New Zealand;X-APPLE-RADIUS=500;X-TITLE=Ensors Road\, Woolston Campus:geo:172.662522,-43.548963 CATEGORIES:Courses ATTACH;FMTTYPE=image/jpeg:https://www.hera.org.nz/wp-content/uploads/01.WeldingCentre_1200x800.jpg ORGANIZER;CN="Alan%20McClintock":MAILTO:alan.mcclintock@hera.org.nz END:VEVENT BEGIN:VEVENT DTSTART;TZID=UTC+13:20191004T090000 DTEND;TZID=UTC+13:20191004T160000 DTSTAMP:20190323T132132 CREATED:20181123T025244Z LAST-MODIFIED:20190319T212816Z UID:7988-1570179600-1570204800@www.hera.org.nz SUMMARY:Welding Supervisor | Welding Inspection Part 1 Exam October | Auckland DESCRIPTION:[vc_row][vc_column][vc_column_text] \nWelding Supervisor | Welding Inspection Part 1 | Exam\nAuckland Friday 4th October\n\n[/vc_column_text][/vc_column][/vc_row][vc_row][vc_column][vc_tta_tabs][vc_tta_section title=”Overview” tab_id=”1518482179102-93cebb0f-f228″][vc_row_inner][vc_column_inner width=”1/2″][vc_column_text]AS 2214 Welding supervisor/Welding technology module 1 exam \nApplicants for this exam will be assessed to ensure they meet the pre-examination requirements specified by the International Institute of Welding (IIW) and AS 2214. \nPublications required to prepare for IIW and HERA examinations[/vc_column_text][/vc_column_inner][vc_column_inner width=”1/2″][vc_single_image image=”6291″ img_size=”full” add_caption=”yes” onclick=”custom_link” img_link_target=”_blank” link=”https://www.hera.org.nz/wp-content/uploads/SCIAPS-WORKSHOP-NZ-HERA-2018.pdf”][/vc_column_inner][/vc_row_inner][vc_row_inner][vc_column_inner][vc_column_text] \n\nStudent notes issued for the course\nAS/NZS 1554.1:2011 Structural steel welding – Welding of steel structures\nAS/NZS 1554.5:2011 Structural steel welding – Welding of steel structures subject to high levels of fatigue loading\nAS/NZS 1554.6:2012 Structural steel welding – Welding stainless steels for structural purposes.\n\n[/vc_column_text][/vc_column_inner][/vc_row_inner][/vc_tta_section][vc_tta_section title=”Exam pre-requisites” tab_id=”1523516856391-0244b76e-fe9b”][vc_row_inner][vc_column_inner][vc_column_text]Examination prerequisites \nTo successfully enroll and sit this exam\, applicants must have: \n\nFor IIW WT1 – satisfactory completed the WT1 Welding supervisor course including distance learning component.\nFor AS 2214 – have documentary evidence of having one of the following:\n\n\nThree years approved practical experience in the fabrication engineering industry\, and successful completion of an approved course that includes.\n\n– welding process technology; \n– weld testing and inspection\, and \n– standards and specifications \n\nThree years approved experience in the supervision or inspection of welding\nA qualification in either engineering\, metallurgy or welding\, and three years approved experience related to the practical application of welding.\n\nIf you haven’t supplied the required documentation with your WT1 Welding Supervisor Course application this examination application will not proceed until you have demonstrated that you meet these requirements. \n  \nResults \nEach candidate will be notified by email of the marks awarded for each paper and the result of either PASS or FAIL. \nThe results will be posted to candidates within eight weeks after the examinations have been sat.[/vc_column_text][/vc_column_inner][/vc_row_inner][/vc_tta_section][vc_tta_section title=”Location” tab_id=”1518146612623-d303a88f-95f4″][vc_row_inner][vc_column_inner width=”1/2″][vc_column_text]Auckland \nHERA House \n17-19 Gladding Place\, Manukau \nAuckland 2104[/vc_column_text][/vc_column_inner][vc_column_inner width=”1/2″][vc_gmaps link=”#E-8_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”][/vc_column_inner][/vc_row_inner][/vc_tta_section][vc_tta_section title=”Prices” tab_id=”1523518687697-c5153e94-cc53″][vc_row_inner][vc_column_inner width=”1/2″] \n$300 \n[vc_column_text] \nPaper A \n[/vc_column_text][/vc_column_inner][vc_column_inner width=”1/2″] \n$200 \n[vc_column_text] \nPaper B \n[/vc_column_text][/vc_column_inner][/vc_row_inner][vc_row_inner][vc_column_inner][vc_column_text] \n\nAll prices are inclusive of GSTNon Members\nIf you’re not a HERA member already-yo should seriously consider joining our association! \nNot only will this reduce your course fees nor for your business\, but also for any of your employess throughout the year. And depending on the tier of membership you choose you can also enjoy discounts on offered resources and other membership benifts as well \nFor more information please go to  https://www.hera.org.nz/become-a-member/ or email Brain Low @ brian.low@hera.org.nz\n\n[/vc_column_text][/vc_column_inner][/vc_row_inner][/vc_tta_section][vc_tta_section title=”Register” tab_id=”1508113354455-7b0628c0-17fd”][vc_row_inner][vc_column_inner width=”2/3″][vc_column_text]Register to attend \nSimply fill out the online form below to register.[/vc_column_text][/vc_column_inner][vc_column_inner width=”1/3″][/vc_column_inner][/vc_row_inner][vc_column_text][/vc_column_text][/vc_tta_section][/vc_tta_tabs][vc_empty_space height=”50px”][/vc_column][/vc_row] \n URL:https://www.hera.org.nz/event/welding-supervisor-welding-inspection-part-1-exams-copy/ LOCATION:AKL CATEGORIES:Courses ATTACH;FMTTYPE=image/jpeg:https://www.hera.org.nz/wp-content/uploads/20180412_Event_WeldingSupervisorExams_WELD-AM.jpg ORGANIZER;CN="Alan%20McClintock":MAILTO:alan.mcclintock@hera.org.nz END:VEVENT BEGIN:VEVENT DTSTART;TZID=UTC+13:20191010T080000 DTEND;TZID=UTC+13:20191010T150000 DTSTAMP:20190323T132132 CREATED:20180411T220002Z LAST-MODIFIED:20190319T212743Z UID:6305-1570694400-1570719600@www.hera.org.nz SUMMARY:Welding Supervisor | Welding Inspection Part 1 Exams October - Christchurch DESCRIPTION:[vc_row][vc_column][vc_column_text] \nWelding Supervisor | Welding Inspection Part 1 Exams – Christchurch\nThursday 10th October 2019\n\n[/vc_column_text][/vc_column][/vc_row][vc_row][vc_column][vc_tta_tabs][vc_tta_section title=”Overview” tab_id=”1518482179102-93cebb0f-f228″][vc_row_inner][vc_column_inner width=”1/2″][vc_column_text]AS 2214 Welding supervisor/Welding technology module 1 exam \nThis is available only to attendees of the our previously held week long – Welding Supervisor/Inspection Part 1 course. \nApplicants for this exam will be assessed as meeting the pre-examination requirements specified by the International Institute of Welding (IIW) and AS 2214. \n  \nPublications required to prepare for IIW and HERA examinations[/vc_column_text][/vc_column_inner][vc_column_inner width=”1/2″][vc_single_image image=”6291″ img_size=”full” add_caption=”yes” onclick=”custom_link” img_link_target=”_blank” link=”https://www.hera.org.nz/wp-content/uploads/SCIAPS-WORKSHOP-NZ-HERA-2018.pdf”][/vc_column_inner][/vc_row_inner][vc_row_inner][vc_column_inner][vc_column_text] \n\nStudent notes issued for the course\nAS/NZS 1554.1:2011 Structural steel welding – Welding of steel structures\nAS/NZS 1554.5:2011 Structural steel welding – Welding of steel structures subject to high levels of fatigue loading\nAS/NZS 1554.6:2012 Structural steel welding – Welding stainless steels for structural purposes.\n\n[/vc_column_text][/vc_column_inner][/vc_row_inner][/vc_tta_section][vc_tta_section title=”Exam pre-requisites” tab_id=”1523516856391-0244b76e-fe9b”][vc_row_inner][vc_column_inner][vc_column_text]Examination prerequisites \nTo successfully enroll and sit this exam\, applicants must have: \n\nFor IIW WT1 – satisfactory completed the WT1 Welding supervisor course including distance learning component.\nFor AS 2214 – have documentary evidence of having one of the following:\n\n\nThree years approved practical experience in the fabrication engineering industry\, and successful completion of an approved course that includes.\n\n– welding process technology; \n– weld testing and inspection\, and \n– standards and specifications \n\nThree years approved experience in the supervision or inspection of welding\nA qualification in either engineering\, metallurgy or welding\, and three years approved experience related to the practical application of welding.\n\nIf you haven’t supplied the required documentation with your WT1 Welding Supervisor Course application this examination application will not proceed until you have demonstrated that you meet these requirements. \n  \nResults  \nEach candidate will be notified by email of the marks awarded for each paper and the result of either PASS or FAIL. \nThe results will be posted to candidates within eight weeks after the examinations have been sat. \n**No results will be issued if there are unpaid fees[/vc_column_text][/vc_column_inner][/vc_row_inner][/vc_tta_section][vc_tta_section title=”Location” tab_id=”1518146612623-d303a88f-95f4″][vc_row_inner][vc_column_inner width=”1/2″][vc_column_text]Address \nARA Institute of Canterbury \nRoom VF101\, Woolston Campus \nEnsors Road \nChristchurch 8023[/vc_column_text][/vc_column_inner][vc_column_inner width=”1/2″][vc_gmaps link=”#E-8_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”][/vc_column_inner][/vc_row_inner][/vc_tta_section][vc_tta_section title=”Price” tab_id=”1523518687697-c5153e94-cc53″][vc_row_inner][vc_column_inner width=”1/2″] \n$300 \n[vc_column_text] \nPaper A \n[/vc_column_text][/vc_column_inner][vc_column_inner width=”1/2″] \n$200 \n[vc_column_text] \nPaper B \n[/vc_column_text][/vc_column_inner][/vc_row_inner][vc_row_inner][vc_column_inner][vc_column_text] \n\nAll prices are inclusive of GST\n\nNon Members \nIf you’re not a HERA member already-yo should seriously consider joining our association! \nNot only will this reduce your course fees nor for your business\, but also for any of your employess throughout the year. And depending on the tier of membership you choose you can also enjoy discounts on offered resources and other membership benifts as well \nFor more information please go to  https://www.hera.org.nz/become-a-member/ or email Brain Low @ brian.low@hera.org.nz[/vc_column_text][/vc_column_inner][/vc_row_inner][/vc_tta_section][vc_tta_section title=”Register” tab_id=”1508113354455-7b0628c0-17fd”][vc_row_inner][vc_column_inner width=”2/3″][vc_column_text]Register to attend \nSimply fill out the online form below to register.[/vc_column_text][/vc_column_inner][vc_column_inner width=”1/3″][/vc_column_inner][/vc_row_inner][vc_column_text][/vc_column_text][/vc_tta_section][/vc_tta_tabs][vc_empty_space height=”50px”][/vc_column][/vc_row] \n URL:https://www.hera.org.nz/event/christchurch-as2214-welding-supervisor-exam/ LOCATION:ARA Institute of Canterbury (formerly CPIT)\, Ensors Road\, Woolston Campus\, Christchurch\, AKL\, New Zealand GEO:-43.548963;172.662522 X-APPLE-STRUCTURED-LOCATION;VALUE=URI;X-ADDRESS=ARA Institute of Canterbury (formerly CPIT) Ensors Road Woolston Campus Christchurch AKL New Zealand;X-APPLE-RADIUS=500;X-TITLE=Ensors Road\, Woolston Campus:geo:172.662522,-43.548963 CATEGORIES:Courses ATTACH;FMTTYPE=image/jpeg:https://www.hera.org.nz/wp-content/uploads/20180412_Event_WeldingSupervisorExams_WELD-AM.jpg ORGANIZER;CN="Alan%20McClintock":MAILTO:alan.mcclintock@hera.org.nz END:VEVENT BEGIN:VEVENT DTSTART;VALUE=DATE:20200221 DTEND;VALUE=DATE:20200222 DTSTAMP:20190323T132132 CREATED:20190218T222244Z LAST-MODIFIED:20190322T004319Z UID:8815-1582243200-1582329599@www.hera.org.nz SUMMARY:2020 VISION Conference & HERA Nation Dinner DESCRIPTION:[vc_row][vc_column][vc_column_text] \nHERA | 2020 VISION Conference | Members only | Limited seats | Auckland\n[/vc_column_text][vc_column_text]2020 VISION brings together 5 of the world’s thought leaders on digital fabrication processes\, 3D printing of large scale steel components\, HR innovation\, future technology impacting the engineering industry\, and business innovation culture. You’ll get insights into what will affect you in the next three years\, what will work and what won’t\, and spot the agents of disruption which are looming over the horizon for you and your fellow members. \nEnjoy the company of your fellow HERA members as we take you on a journey which will change your mindset\, throw you into chaos but come out with new ideas\, new motivation\, and inspiration that can help your company thrive in the near future. \nIn the evening\, we have a bit of fun and fellowship as we celebrate who we are and share our successes at the HERA Nation dinner.[/vc_column_text][vc_separator][/vc_column][/vc_row][vc_row][vc_column][vc_tta_tabs][vc_tta_section title=”Who can attend” tab_id=”1549582174950-05b79489-daea”][vc_column_text]Who can and should attend? \n2020 VISION is for you leaders – visionaries and dreamers – those wanting a brave\, brighter future for your organisation. You’re looking for insights into what will affect your industry in the next three years\, and be connected to the latest thought leaders in areas that will impact your business. \nHeld at the Cordis Hotel Auckland\, we’ll start with an industry breakfast which connects our members with the next generation of engineers and leaders coming out of the universities. Then we spoil you with thought provokers and visionaries who have been there\, done that and will show you how you can too. \nIn the evening\, you get to relax with your teammates and fellow HERA members in a beautiful setting on top of the Auckland Museum’s event centre. What a view![/vc_column_text][/vc_tta_section][vc_tta_section title=”Programme” tab_id=”1549582857915-ec0df5cd-6745″][vc_column_text]2020 VISION \n\n\n\n07:00 – 9:00\nTOC Frame of Reference – Variation and Interdependence in Operations. \n– The TOC Framework & 3 Bottle metaphor \n– The impact of variation and interdependence \n– A new look at the common way of doing work \n– Understand the real cause of our problems – our thinking \n– A surprising conclusion. \n \n\n\n10:45 – 13:00\nOptimised Flow\, Drum Buffer Rope\, – the TOC solution for Operational Flow. \n– Applying the systems approach to the business \n– A new way of setting up the organisation\, a new way of planning  & execution of operations \n– How to manage bottlenecks\, focus activities and the flow of revenue \n– Buffers & protective capacity. \n \n\n\n\nLunch \n \n\n\n14:00 – 15:00\nCritical Chain – the TOC solution for Project Execution. \n– Understanding the biggest cause of poor project due date performance \n– Managing human behaviour to improve project execution \n– Dealing with the real cause of late delivery and how to finish projects faster than planned \n– Single projects and Multiple projects \n– Job shop environments \n \n\n\n15:00 – 16:00\nReplenishment – the TOC solution for Supply Chain. \n– Discovering the flaws of the typical forecasting system \n– Switching from Push to Pull systems \n– Replenishment on actual consumption & buffer management \n– Higher availability with lower stock levels \n– A proven alternative to forecasting. \n \n\n\n16:15 – 17:00\nFinance & Measurements the TOC Way – Throughput Accounting. \n– A new way of looking at managerial finances \n– An Alternative to the concept of product cost; revenue leverage \n– Identifying the leverage that determines flow of revenue.\n\n\n\n[/vc_column_text][/vc_tta_section][vc_tta_section title=”Presenters” tab_id=”1524459413493-f2fac342-5e13″][vc_row_inner][vc_column_inner width=”1/4″][vc_single_image image=”8741″][/vc_column_inner][vc_column_inner width=”3/4″][vc_column_text]Chris Riddell | Futurist \nA futurist and digital technology expert who will crystal ball for our members what is ahead for our industry. Innovation -> Disruption -> Transformation. \nGijs van der Velden | CEO\, MX3D \nCreator of the first of its kind 3D printed steel footbridge in the Netherlands\, Gijs will share with us the challenges and rewards of his experience\, and what he see the future bringing to our industry. \nDes Watkins | CEO\, Watkins Steel \nAustralian steel fabricator who has developed a four-step end-to-end digital process for his steel fabrication business\, utilising 3D scanning\, digital twins\, augmented reality and automation \nMike Hutchinson | Adjunct Prof Innovation\, AUT \nA businessman\, media guru and adjunct professor of innovation at the Auckland University of Technology\, Mike will focus on how the industry can improve its image\, build a community and raise its attractiveness. \nAlia Bojilova | HR specialist\, Sheffield Recruitment \nHR specialist who will help our members understand the labour market and what the next generation of engineers will look for in a prospective employer\, as well as how to retain staff.[/vc_column_text][/vc_column_inner][/vc_row_inner][/vc_tta_section][vc_tta_section title=”Testimonials” tab_id=”1525907868972-ac6c9c8c-4f92″][vc_column_text]Chris Riddell\, Futurist \n\nChris Riddell showed a wonderful articulation for technology and its real life use\, with practical examples and none of the propeller spinning complexity and jargon that is often seen. Chris has also recently been a keynote speaker at our Telstra Retail COnference\, speaking about the future of digital and how it’s impacting our world. Chris was able to not only entertain and inspire but delivered on the future ways of working and the challenges faced by business leaders today. I’d highly recommend Chris for any key speaker appointments for business that are needing thought provoking discussion on how their businesses will continue in the future with technology.\nTelstra\n\nMike Hutchinson\, Adjunct Prof Innovation\, AUT \n\n“Mike spent the time to meet with me and review his presentation. He was entertaining and illuminating\, a great way to start our conference.”\nInsurance Advisernet New Zealand\n\nDes Watkins\, digital pioneer at Watkins Steel \n\n“Watkins Steel are doing amazing stuff and achieving real world outcomes\, which have redefined their business. By far one of the finest corporate applications of immersive tech that I’ve see. A real game changer – which has massive implications and potential for the traditional building & manufacturing industries!”\nJames Picton\n\n[/vc_column_text][/vc_tta_section][vc_tta_section title=”HERA Nation Dinner” tab_id=”1549582178573-ee1c19b4-4f34″][vc_column_text]The first ever HERA Nation Dinner will bring our members together for a night of recognition\, celebration and connection. We want you to come and have a great night out as we reflect on the achievements of our members. \nThis memorable night includes an exquisite 3-course meal\, HERA awards and world-class entertainment. There will also be a silent auction and a few other surprises – all to raise money for changing the life of some promising engineering students.[/vc_column_text][/vc_tta_section][vc_tta_section title=”Cost” tab_id=”1500872991069-d507152e-87b4″][vc_row_inner][vc_column_inner][vc_column_text]This is an exclusive members only event! \nHERA Nation Breakfast only – $65 + GST\nPlenary only (includes breakfast\, lunch and tea breaks) – $999 + GST\nDinner only – $200 + GST\nPlenary & dinner – $1\,199 + GST \nNot a HERA member?\nPlease note it’s not too late to sign up for membership to secure your place in this inaugural event! Find out how to become one today https://www.hera.org.nz/become-a-member/ or email Brian Low @ brian.low@hera.org.nz[/vc_column_text][vc_empty_space][/vc_column_inner][/vc_row_inner][vc_row_inner][vc_column_inner width=”1/3″] \n$1\,380 includes GST \n[/vc_column_inner][vc_column_inner width=”1/3″] \n$75 includes GST \n[/vc_column_inner][vc_column_inner width=”1/3″] \n$1\,150 includes GST \n[/vc_column_inner][/vc_row_inner][vc_row_inner][vc_column_inner width=”1/3″][vc_column_text] \n2020 VISION + HERA Nation dinner \nIncludes breakfast\, lunch\, tea breaks and dinner \n[/vc_column_text][/vc_column_inner][vc_column_inner width=”1/3″][vc_column_text] \nHERA Nation breakfast only \nA special event bringing together the next generation of engineers and members \n[/vc_column_text][/vc_column_inner][vc_column_inner width=”1/3″][vc_column_text] \n2020 VISION conference only \nIncludes breakfast\, lunch and tea breaks \n[/vc_column_text][/vc_column_inner][/vc_row_inner][vc_column_text][/vc_column_text][vc_row_inner][vc_column_inner width=”1/3″] \n$230 includes GST \n[/vc_column_inner][/vc_row_inner][/vc_tta_section][vc_tta_section title=”Register” tab_id=”1508113354455-7b0628c0-17fd”][vc_row_inner][vc_column_inner][vc_column_text]Bookings \nWe’re taking expressions of interest at the moment so book a spot for you and your team today. Click here and let us know how many of you and when registration opens\, you’ll be the first to get an email letting you know you can sign up![/vc_column_text][/vc_column_inner][/vc_row_inner][vc_row_inner][vc_column_inner][vc_column_text][/vc_column_text][/vc_column_inner][/vc_row_inner][/vc_tta_section][/vc_tta_tabs][vc_separator border_width=”3″][/vc_column][/vc_row] \n URL:https://www.hera.org.nz/event/2020-vision-hera-nation/ LOCATION:Grand Millennium\, 71 Mayoral Drive\, Cnr Vincent St\, Auckland\, AKL\, 1010\, New Zealand CATEGORIES:Conferences END:VEVENT END:VCALENDAR