HERA Technical Guide No 03:2024 rev 2 – AS/NZS 1554.1: A guide to the qualifications of Welding Procedures – positions qualified for butt welds

HERA Technical Guide No 03:2024 rev 2 – A guide to the qualifications of Welding Procedures – positions qualified for butt welds

Want a discount? Become a member by purchasing Associate 'Gold' membership 150 and Over, Associate 'Gold' membership 140-149, Associate 'Gold' membership 130-139, Associate 'Gold' membership 120-129, Associate 'Gold' membership 110-119, Associate 'Gold' membership 100-109, Associate 'Gold' membership 80-89, Associate 'Gold' membership 70-79, Associate 'Gold' membership 60-69, Associate 'Gold' membership 50-59, Associate 'Gold' membership 40-49, Associate 'Gold' membership 30-39, Associate 'Gold' membership 20-29, Associate 'Gold' membership 1-19, HERA Ordinary 'Platinum' membership 4-19, Ordinary 'Platinum' membership 20-29, Ordinary 'Platinum' membership 30-39, Ordinary 'Platinum' membership 40-49, Ordinary 'Platinum' membership 50-59, Ordinary 'Platinum' membership 60-69, Ordinary 'Platinum' membership 70-79, Ordinary 'Platinum' membership 100-109, Ordinary 'Platinum' membership 110-119, Ordinary 'Platinum' membership 120-129, Ordinary 'Platinum' membership 130-139, Ordinary 'Platinum' membership 140-149, Ordinary 'Platinum' membership 150 and Over or HERA Ordinary 'Platinum' membership 1-3 staff, or log in if you are a member.

Category:

Description

Authors: Michail Karpenko; Alan McClintock; Volkan Yakut
Edition: HERA Technical Guide No 03:2024 rev 2
Description: PDF
Executive summary: Documented welding procedures (WPS) are a mandatory requirement for all welding operations performed under AS/NZS 1554.1 and AS/NZS 5131 Section 7. A qualified weld procedure is a procedure to which a test weld has been made and the specimens prepared as specified in AS/NZS 1554.1. This Technical Guide provides recommendations for the range of welding positions that can be qualified for the butt welds to AS/NZS 1554.1. It also includes recommendations on how existing welding procedures, that do not meet the requirements of AS/NZS 1554.1 Section 4.1.4, can be revised to comply with this standard..